Products
-
Heat shrink sleeves KY-175℃ temperature resistant 175℃ KYNAR
-
ZCK open corrugated casing
-
KY-PTFE 260℃ PTFE Teflon Heat Shrink Sleeve
-
Teflon sleeve at 260℃ (not heat shrinkable)
-
KY-MT-PVDF environmentally friendly flexible fluorine medical heat shrink tubing
-
DXDS Tin Copper Mono Wire Braided Screened Mesh Pipe
-
Heat Shrink Cover with Adhesive for WCAP Cable Terminal
-
KEYUACE is carbon corrugated pipe (commonly known as carbon thread pipe, single wall spiral pipe, carbon corrugated pipe, black spiral pipe)
-
ZCP - all-plastic rubber protective sleeve with braiding for separate wires
-
Snap-on tube for M number
-
Cold pressed nylon bullet terminals with male and female thread
-
HW anti-slip pattern heat shrink sleeves
-
OAF aluminum foil fiberglass pipe
-
OFPT single-core fiber optic protective
-
Road accident carpet protective sleeve
-
MP-35KV Busbar Heat Shrink Sleeve
How to use HUS-DW in the Video
Product overview: This heat shrink tubing for solar connectors has an environmentally friendly polyolefin (PE) outer layer and a specially designed hot melt adhesive inner layer. Once fully heat-shrink, it will not form excess or bleed glue, effectively solving common...
Description
marker
Product overview:
This heat shrink tubing for solar connectors has an environmentally friendly polyolefin (PE) outer layer and a specially designed hot melt adhesive inner layer. Once fully heat-shrinkable, it will not produce excess or bleed adhesive, effectively solving the common problems of conventional adhesive-backed heat-shrinkable tubing, such as adhesive leakage at high temperatures and adhesive layer aging or peeling off. The product provides superior insulation and water resistance, longer service life and a neat appearance when shrinked. It is widely used in photovoltaic, communication, power, outdoor wiring and industrial industries, providing reliable protection for a variety of cables and connectors.
Product Features:
- Initial shrink temperature: 70°C
- Full shrinkage temperature: 125°C
- Operating temperature: -45°C to +125°C
- Shrinkage ratio: 3:1, 4:1
- RoHS Compliant
- Standard color: black; Other colors are possible (on individual order).
- Custom sizes and cutting services are available upon customer request.
Product Specifications:
| Size | Shrinkage (mm) | After complete shrinkage (mm) | Standard packaging (m/roll) | |||
| Imperial | Metric | D: Int. diameter (min) | d: Int. diameter (min) | Total wall thickness | Wall thickness | |
| HUS-DW 3X (shrinkage ratio 3:1) | ||||||
| 3/32 | Φ2.4 | ≥2.4 | ≤0.80 | 0.80±0.30 | 0.40±0.20 | 200 |
| 1/8 | Φ3.2 | ≥3.2 | ≤1.00 | 0.90±0.30 | 0.40±0.20 | 200 |
| 3/16 | Φ4.8 | ≥4.8 | ≤1.60 | 1.05±0.30 | 0.40±0.20 | 100 |
| 1/4 | Φ6.4 | ≥6.4 | ≤2.20 | 1.20±0.30 | 0.40±0.20 | 100 |
| 5/16 | Φ7.9 | ≥7.9 | ≤2.70 | 1.35±0.30 | 0.45±0.20 | 100 |
| 3/8 | Φ9.5 | ≥9.5 | ≤3.20 | 1.45±0.30 | 0.50±0.20 | 50 |
| 1/2 | Φ12.7 | ≥12.7 | ≤4.20 | 1.65±0.30 | 0.50±0.20 | 1.22 |
| 5/8 | Φ15.0 | ≥15.0 | ≤5.20 | 1.70±0.30 | 0.50±0.30 | 1.22 |
| 3/4 | Φ19.1 | ≥19.1 | ≤6.30 | 1.95±0.30 | 0.60±0.30 | 1.22 |
| 1 | Φ25.4 | ≥25.4 | ≤8.50 | 2.00±0.40 | 0.60±0.30 | 1.22 |
| 1-1/4 | Φ30.0 | ≥30.0 | ≤10.20 | 2.15±0.40 | 0.65±0.30 | 1.22 |
| 1-1/2 | Φ39.0 | ≥39.0 | ≤13.50 | 2.45±0.40 | 0.75±0.30 | 1.22 |
| 2 | Φ50.0 | ≥50.0 | ≤17.00 | 2.75±0.40 | 0.80±0.30 | 1.22 |
| 2-1/2 | Φ64.0 | ≥64.0 | ≤21.00 | 3.05±0.40 | 1.05±0.30 | 1.22 |
| 3 | Φ75.0 | ≥75.0 | ≤25.00 | 3.05±0.50 | 1.05±0.40 | 1.22 |
| 3-1/2 | Φ90.0 | ≥90.0 | ≤30.00 | 3.10±0.50 | 1.05±0.40 | 1.22 |
| 4 | Φ100 | ≥100 | ≤34.00 | 3.10±0.50 | 1.10±0.40 | 1.22 |
| 5 | Φ125 | ≥125 | ≤42.00 | 3.15±0.50 | 1.10±0.40 | 1.22 |
| HUS-DW 4X (shrinkage ratio 4:1) | ||||||
| 2/13 | Φ4.0 | ≥4.0 | ≤1.0 | 1.05±0.30 | 0.50±0.30 | 200 |
| 1/4 | Φ6.0 | ≥6.0 | ≤1.5 | 1.15±0.30 | 0.50±0.30 | 100 |
| 5/16 | Φ8.0 | ≥8.0 | ≤2.0 | 1.15±0.30 | 0.60±0.30 | 100 |
| 1/2 | Φ12.0 | ≥12.0 | ≤3.0 | 1.75±0.30 | 0.60±0.30 | 1.22 |
| 5/8 | Φ16.0 | ≥16.0 | ≤4.0 | 2.00±0.30 | 0.70±0.30 | 1.22 |
| 15/19 | Φ20.0 | ≥20.0 | ≤5.0 | 2.30±0.40 | 0.70±0.30 | 1.22 |
| 1 | Φ24.0 | ≥24.0 | ≤6.0 | 2.60±0.40 | 0.75±0.30 | 1.22 |
| 1-1/4 | Φ32.0 | ≥32.0 | ≤8.0 | 3.00±0.50 | 0.90±0.30 | 1.22 |
| 2 | Φ52.0 | ≥52.0 | ≤13.0 | 3.35±0.50 | 0.95±0.30 | 1.22 |
Specifications:
| Product property | Test method | Test Date/Result |
| Tensile strength | ASTM D 2671 | ≧10.4 MPa |
| Elongation at break | ASTM D 2671 | ≧200% |
| Tensile strength after aging | 158 °C, 168 h | ≧7.3 MPa |
| Elongation at break after aging (%) | 158 °C, 168 h | ≧100% |
| Longitudinal shrinkage | ASTM D 2671 | -8% ~ +8% |
| Dielectric strength (kV/mm) | IEC 60243 | ≧15 kV/mm |
| Flammability | ASTM D 2671B | PASS |
| Volume resistance | IEC 60093 | ≧10¹⁴ Ohm cm (min.) |
| Technical Indicators of Hot Melt Glue | ||
| Water absorption | ASTM-D570 | < 0,2% |
| Vikat softening point | ASTM-E28 | 95°C |
| Peel Strength (PE) | ASTM D 1000 | ≧120 N/25 mm |
| Peel strength (Al) | ASTM D 1000 | ≧80 N/25 mm |
| Material: PE + hot melt glue | ||
contact us
Related Popular Products
ZCK open corrugated casing
Open corrugated sleeve is a new type of woven sleeve carefully woven from polyester multifilament and acid monofilament, which has good wear resistance, fire resistance, noise reduction and easy operation. The open structure facilitates the protection, reinstallation, maintenance and repair of the fiber optic wire harness.
HNM High Wear Resistant Braided Mesh Pipe
HNM High Wear Resistant Braided Mesh Pipe is made of special high wear resistant monofilament weave. In addition to the elasticity, fire resistance and heat insulation of ordinary PET woven sleeve, its wear resistance is three times higher than that of ordinary PET woven mesh pipe.
Halogen-free, environmentally friendly, non-flammable medical heat shrink tubing 105H
Product Name: Environmentally friendly, non-flammable medical heat shrink tubing. Model: KY-MT-105R Insulating properties, high flexibility, suitable for human contact, strong environmental protection.
Contact us for more information
This is the most important thing in the world, More and more. The most beautiful pictures More, more, more, more and more.
Waterproof TPU Tubular Film
TPU Tubular Film Product Description Polyester Polyurethane Film Extremely...
HW anti-slip pattern heat shrink sleeves
Product Introduction Made of irradiated cross-linked polyolefin, beautiful color, never...
RSFR-MT-125H halogen-free environmentally friendly flame retardant medical tube
Product Name：Non-environmental fireproof medical tube High temperature resistance Insulating properties Compatible with human contact Corrosion resistance High fire resistance
Eco-friendly HUS Heat Shrink Tubing Containing Glue
Product Description The outer layer consists of a double layer of fire-resistant insulating...
HUS-GR Military Standard Double Wall Fireproof Pipe Containing Adhesive
Product Description It is manufactured by co-extrusion of flame retardant polyolefin...
protective tube for car transmission cable
The car towing cable protection tube adopts a three-layer composite structure consisting of an inner polyoxymethylene (POM) tube, 18 longitudinal steel wires and an outer layer of PA6 polyamide. Its inner wall is smooth, operates silently, combines high strength, wear resistance and flexibility, and is well suited to extreme high and low temperatures.
PET capacitor sleeve
Environmentally friendly PET capacitor sleeve with 125℃ temperature resistance, passed UL224 fire retardant certificate, its advantages are environmental protection, heat resistance, frost resistance, crack resistance, not easy to shrink secondary, comply with RoHS, Sony SS-00259, Reach (SVHC), PoHS and halogen-free hazardous substance control regulations, pass through oven 250C×30 seconds and constant temperature -40C×60 minutes without breaking.
TPU inner tube for bicycles and mountain bikes
Product Introduction TPU inner tube for mountain bikes and bicycles. This one in...
KY-PA12 nylon pipe
Product Introduction Nylon pipe (KY-PA12) is made of new German material...
ZIP-PB Screened type protective sleeve with zipper
ZIP-PB shielding protective sleeve with zipper is made of tinned copper hook wire mesh, fire-resistant fabric, zipper composite. It features highly sensitive electromagnetic interference shielding, noise reduction, dustproof and wear-resistant. Because the product itself is equipped with a zipper, it is convenient to install and dismantle and convenient to use.
HSU-PA термоусадочная трубка с клеем
More information about this type of work, Read more about it and see it again It's too late to see what happens next, and it's too late водонепроницаемой проводки резиновых проводов.
Heat shrink sleeve for tire mp-20 KV
mp-20kv busbar heat shrink sleeve, known as copper rod protection tube, is made of cross-linked environmentally friendly polyolefin heat shrink material, which is bombarded by high-power electron beam.