Products
-
Y-Shape Special Shaped Shrink Wrap
-
Eco-friendly HUS Heat Shrink Tubing Containing Glue
-
Blank JSA Logo Sleeve on Roll
-
Halogen-free, environmentally friendly, non-flammable LWA medical heat shrink tubing
-
silicone braided
-
WAG-PP corrugated pipe
-
KY-135℃-3X Heat Resistant 135℃ Polyolefin Heat Shrink Sleeve
-
HSCT-150 Single Ring Heat Shrink Solder Terminal Sleeve
-
Spiral pipe LX-PP
-
ZSC-Self-rolling open type braided sleeve
-
KY-TSB -Splashproof Fire Retardant Double Layer Polyurethane Hose
-
KY-FEP 200℃ FEP Teflon Heat Shrink Sleeve
-
CM communication differential
-
Curved Molded Bushing
-
Number marker type N
-
TPU inner tube for bicycles and mountain bikes
KY-ES Shielded Heat Shrink Tubing
Shielded heat shrink sleeve is a composite of heat shrink polyolefin tubing and a flexible shrink conductive layer. By heating the surface of the polyolefin heat shrink tubing, it shrinks simultaneously with the conductive layer, providing effective EMI shielding for cable/connector termination.
Description
marker
Product Description
Shielded heat shrink sleeve is a composite of heat shrink polyolefin tubing and a flexible shrink conductive layer. By heating the surface of the polyolefin heat shrink tubing, it shrinks simultaneously with the conductive layer, providing effective EMI shielding for cable/connector termination.
This type of shielded heat shrink sleeve saves weight and is easier to manufacture than traditional metal braid. Its shielding efficiency reaches 35–70 dB in the frequency range 14–10 GHz.
Functions
1) High shielding efficiency. It has a very wide shielding band, effective in the 14-10 GHz range, and can meet the stringent requirements of electronic equipment. After cutting and shrinking, the shielding efficiency reaches more than 50dB, which is much higher than that of conventional shielded cables.
2) Light weight compared to commonly used anti-wave sleeves, the weight reduction is more than 35% without considering the use of protective heat-shrinkable tubes for anti-wave sleeves. Particularly for small diameters, weight reduction of more than 60%.
3) Good flexibility. Since the protective layer is made of polymer material, it has very good flexibility and can be bent as desired without damaging the protective layer.
4) Easy to use: use a hair dryer commonly used for construction, it is convenient and fast.
5) The standard product shrinkage rate exceeds 50%, electromagnetic protection and high shrinkage heat shrink tubes with a shrinkage rate of more than 75% can also be processed.
Applications
1 for high performance shielded cables
2 for cable connector
3 instructions
(1) Clean the connectors (cables).
(2) Select a suitable heat shrink tube to cover the connector.
(3) Use a hot air fan (hair dryer) to heat the heat shrink tube.
(4) Transfer connections (cables) or hot air machine, shrink tube with uniform heating.
(5)Additionally shrink the heat shrink tube.
(6) Complete the shielding of the connector (cable).
Specifications and models
| model | inner diameter (mm) | length (mm) | Technical SpecificationsTechnical Specifications | |||
| Shielding Efficiency (dB) | Shrinkage (%) | Shrinkage temperature °C | Operating Temperature℃ | |||
| KY-ES-2002 | 2 | 1000 | ≥50 | 50~85 | 120~190 | -55~130 |
| KY-ES-2003 | 3 | 1000 | ||||
| KY-ES-2004 | 4 | 1000 | ||||
| KY-ES-2006 | 6 | 1000 | ||||
| KY-ES-2008 | 8 | 1000 | ||||
| KY-ES-2010 | 10 | 1000 | ||||
| KY-ES-2015 | 15 | 1000 | ||||
| KY-ES-2020 | 20 | 1000 | ||||
| KY-ES-2025 | 25 | 1000 | ||||
| KY-ES-2030 | 30 | 1000 | ||||
| KY-ES-2040 | 40 | 1000 | ||||
| KY-ES-2080 | 80 | 1000 | ||||
| Application: The above are only some of the standard straightening characteristics. Other characteristics may be changed according to the customer's requirements. The maximum length is 10 meters. | ||||||
contact us
Related Popular Products
Three Way Heat Shrink Molding Sleeve
KEYUACE Heat Shrink Cable Plugs provide stress protection for cable assemblies used in harsh environments. These products help prevent the osmotic effects of salt water, fuels and petroleum-based solvents.
KY-SR Medical silicone tube
KEYUCE silicone tube can be used in food and medical fields, particularly food grade silicone tube, medical silicone tubes, peristaltic silicone tubes, ultra-thin silicone tubes, molded silicone products, etc. Equipment, medical consumables, GMP pharmaceuticals, hemodialysis, heart and brain treatment, blood, food and other fields provide customers with high-quality precision silicone products. 1.Product Features All specifications can be customized according to customer requirements. 2.Divided by use: Medical silicone tube Single chamber, double chamber, triple chamber, multi chamber, double row, triple row silicone tube or other special shaped silicone tube. Color: clear natural color/customized Shore hardness: 30A - 80A Heat resistance: -50°C – 200°C 3.Medical ultra-thin silicone tube Material: Imported raw materials of pure medical grade silicone rubber, extrusion molding with platinum vulcanization Size: 0.3*0.6mm, 0.5*1.0mm, customized Color: Clear/Customized Shore hardness: 30A-80A 4.Special silicone material for peristaltic pump National standard size: 13#14#15#16#17#18#19#24#25#35#36#73#82#88#92#etc. Custom size: 1*3 1.5*3.5 1.6*3.2 2*4 2.2*4.4 2.44 2.64.73546/customer Product Color: Transparent Natural Color/Beige/Customized Shore hardness: 30A-80A Temperature range: -50°C-200°C Pressure range: 0.1-0.3MPa 5.Product Features: (1). Using imported silicone rubber extrusion molding process, the inner wall of the cavity is smooth and will not stick after long-term extrusion. (2). The dimensional tolerance is accurate and the wall thickness is uniform and not eccentric. (3). Fatigue resistance, wear resistance, high tensile strength, high elasticity, less slag after long-term wear and stable fluidity. 6.Product service life: (1) The main factors affecting the service life of silicone tubes are: (2) Performance characteristics of the silicone tube material; (3) Pump speed; (4) Pressure when pumping liquid; (5) Chemical compatibility; (6) Corrosiveness of the liquid. 7.KEYUCE's test method for the service life limit of silicone peristaltic pump tube is as follows: (1). The pumped medium is clean water at normal temperature and pressure; (2). The peristaltic pump speed is 300 rpm; (3). Continuous testing for 24 hours without interruption: (4). The test showed that the maximum continuous operation time of the silicone peristaltic pump tube is more than 500 hours 8.Chemical suitability of the product (1). Resistant to weak acids and weak bases: weak corrosives, low concentration potassium permanganate, ethanol reagents, animal oils, vegetable oils, vanilla, glucose, alcohol, hand sanitizers, fruit juices, disinfectants, blood, weakly acidic and alkaline gases, etc. (2). Not suitable for strong acids and strong alkalis and organic solvents such as: high concentration sulfuric acid, hydrochloric acid, sodium hydroxide, nitric acid, lubricating oil, silicone oil, mineral oil, machine oil, gasoline, diesel oil, hydraulic oil, high concentration acetone, carbon tetrachloride, high ozone concentration. (3). If you have other questions about the applicability of the product, please contact us. Scope of application Widely used in: (1). Laboratory equipment, peristaltic pump, dosing pump or other filling equipment. (2). GMP pharmaceuticals, bioengineering, molecular biology, fine chemistry, environmental protection, food industry, drinking water production and other areas Value Added Services (1). Can be customized according to requirements, logo can be printed, and cutting services can also be provided (2) 15m bags/bag or according to the length required by customer (3)Pass five FDA/LFGB/RoHS/REACH/Biocompatibility tests
Heat Shrink Cover with Adhesive for WCAP Cable Terminal
Product Introduction The outer layer is made of cross-linked polyolefin material, and the inner...
HSU-PA термоусадочная трубка с клеем
More information about this type of work, Read more about it and see it again It's too late to see what happens next, and it's too late водонепроницаемой проводки резиновых проводов.
KEYUACE is carbon corrugated pipe (commonly known as carbon thread pipe, single wall spiral pipe, carbon corrugated pipe, black spiral pipe)
Carbon pipe is a new type of single wall spiral protection pipe for power cable, made...
MST-BZ Velcro Braided Sleeve (also called "Self-Adhesive Expanded Woven Mesh")
MST-BZ Velcro Braided Sleeve (also called "self-adhesive expanded woven mesh") is made of polyester monofilament stitched with self-adhesive (Velcro). The product has good heat dissipation, wear resistance, simple and convenient operation, etc.
Silicone Huggers for Candles
This silicone cone candle holder is highly elastic, strong and durable. With anti-slip texture, it fits tightly between the candle, candle bowl and candle holder, preventing wobbling, tilting or falling and keeping the candle upright. At the same time, it can withstand high temperatures.
SR-N silicone tubes
Product Introduction The silicone tube is extruded from environmentally friendly non-toxic...
Curved Molded Bushing
You can choose suitable materials according to different usage environment requirements to meet military and commercial multi-level requirements, easy to install and use, and waterproof with adhesive.
Halogen-free, environmentally friendly, non-flammable LWA medical heat shrink tubing
Product Name: Eco-friendly, non-flammable LWA medical heat shrink tubing. Model: KY-MT-LWA-105R-105H Compatible with human contact, insulating properties, high tear resistance, strong environmental protection, high shrinkage rate.
ZIPF-текстильная рукава плотно тканый с молнией
ZIPF-Instructions for use in ZIPF Most of the time, it's too late. More information about this, More, more information, more information and more эксплуатацией and другими характеристиками. I'm sorry, I'm sorry. It's time to change the size of your phone.
HSCT-R 120 environmentally friendly heat shrink solder terminal
HSCT-R 125 Degree Eco-Friendly Heat Shrink Solder Insulation Terminal
PET Battery Bushing Characteristics Table
This product is an environmentally friendly rubber hose that complies with RoHS, Sony SS-00259, Reach SVHC, RoHS and halogen-free and other relevant hazardous substance control requirements.
LN-BZW zipper braided mesh tube
Made from single-layer polyester mesh stitched with a zipper. The product has good characteristics of heat dissipation, flexibility, flame retardant, wear resistance, simple and convenient operation, etc. The zipper structure is conducive to protecting and reinstalling the internal wiring harness.
ZIP-PB Screened type protective sleeve with zipper
ZIP-PB shielding protective sleeve with zipper is made of tinned copper hook wire mesh, fire-resistant fabric, zipper composite. It features highly sensitive electromagnetic interference shielding, noise reduction, dustproof and wear-resistant. Because the product itself is equipped with a zipper, it is convenient to install and dismantle and convenient to use.
H1：KY-TPU polyester film tube
KY-Polyether TPU film tube is commonly called TPU film sleeves, ultra-thin TPU film sleeves, tubular TPU film sleeves and large-size tubular TPU film sleeves. Its main advantage is that it is easy to weld by high frequency or heat pressing, making it suitable for making inflatable products. In addition, it has excellent biocompatibility, is non-toxic, non-allergenic, non-irritating and non-pyrogenic. It is widely used in medical applications (such as medical pillows, mattresses and stretchers), sports protective equipment, as well as in inflatable toys, water sports equipment, exercise equipment, car seat materials, umbrellas, luggage, ready-made clothing, shoes and handbags.