Products
-
KY-DR Oil Resistant and Corrosion Resistant Heat Shrink Sleeve
-
KY-CAR Car Braided Storage Tube
-
BHS-heat shrinkable braided sle e ving
-
LN-BZW zipper braided mesh tube
-
CM communication differential
-
KY-MT-90R-NV Halogen-free, environmentally friendly, non-flammable medical tube
-
HW anti-slip pattern heat shrink sleeves
-
MCT tightly woven self-adhesive textile sleeves
-
KYPET/HFR High Fire Retardant Braided Mesh Pipe
-
HNM High Wear Resistant Braided Mesh Pipe
-
PE plastic mesh cover
-
Telescopic braided sleeve KY-PPS
-
HESA - Special Rubber Heat Shrink Sleeve for Wire Harness for New Energy Vapors
-
JLBZ - Nylon Braided Sleeves
-
H1：KY-TPU polyester film tube
-
Cold pressed nylon bullet terminals with male and female thread
PET capacitor sleeve
Environmentally friendly PET capacitor sleeve with 125℃ temperature resistance, passed UL224 fire retardant certificate, its advantages are environmental protection, heat resistance, frost resistance, crack resistance, not easy to shrink secondary, comply with RoHS, Sony SS-00259, Reach (SVHC), PoHS and halogen-free hazardous substance control regulations, pass through oven 250C×30 seconds and constant temperature -40C×60 minutes without breaking.
Description
marker
Product presentation
Environmentally friendly PET capacitor sleeve with 125℃ temperature resistance, passed UL224 fire retardant certificate, its advantages are environmental protection, heat resistance, frost resistance, crack resistance, not easy to shrink secondary, comply with RoHS, Sony SS-00259, Reach (SVHC), PoHS and halogen-free hazardous substance control regulations, pass through oven 250C×30 seconds and constant temperature -40C×60 minutes without breaking.
Eco-friendly pet condenser bushings with 125°C temperature resistance with UL224 flame retardant certification. It is environmentally friendly, heat-resistant, cold-resistant, crack-resistant and not subject to secondary shrinkage. it complies with Substance of Very High Concern (SVHC), POH, Halogen Free and other relevant hazardous substance control regulations. It can pass drying oven at 250°C for 30 seconds and constant temperature oven at -40°C for 60 minutes without cracking.
PET performance table
| Product Property | Test method | Unit | Test Date |
| Structural formula
Structural formula |
— | — | (C10H8Oh4) n |
| Appearance | — | — | No contamination, foreign objects, etc.
Pollution-free, foreign bodies, etc |
| insoluble substance undissolved particular | — | mm2 | ≤0.7 |
| bend (280mm) bend | — | mm | Less than 8Φ (under 8Φ) < 3.0
More than 10Φ (above 10Φ) < 3.5 |
| density density | ATSM D792 | g/cm3 | 1.2～1.4 |
| tensile strength | ASTM D638 | N/m2 | ＞107 |
| elongation at break | ASTM D638 | % | ≧62% |
| water absorption | ASTM D570 | % | ＜2.0% |
| dielectric strength | ASTM D149 | KV/mm | ＞15 |
| surface resistivity | ASTM D257 | Ω | ＞109 |
| Volume resistivity | ASTM D257 | Ω cm | ＞1014 |
PET Specification Sheet
| Product
Number |
Size
(mm) |
Lay flat
(mm) |
Wall thickness
(mm) |
Horizontal shrinkage ratio (%) | Vertical Shrinkage ratio (%) | High temperature vertical
shrinkage ratio (%) Hot Oven (180±2)℃×15 |
| KY-PET-003 | 3 | 5.5±0.2 | 0.08±0.015 | 47±4 | 8±3 | 12±3 |
| KY-PET-004 | 4 | 7.0±0.2 | 0.08±0.015 | .. | .. | .. |
| KY-PET -005 | 5 | 9.0±0.2 | 0.08±0.015 | .. | .. | .. |
| KY-PET-006 | 6 | 10.6±0.2 | 0.08±0.015 | .. | .. | .. |
| KY-PET-063 | 6.3 | 10.9±0.2 | 0.08±0.015 | .. | .. | .. |
| KY-PET-008 | 8 | 13.9±0.2 | 0.10±0.02 | 45±4 | .. | .. |
| KY-PET-100 | 10 | 16.9±0.3 | 0.10±0.02 | .. | .. | .. |
| KI-PET -120 | 12 | 20.2±0.3 | 0.10±0.02 | .. | .. | .. |
| KY-PET-125 | 12.5 | 21.1±0.3 | 0.10±0.02 | .. | .. | .. |
| KY-PET-130 | 13 | 21.7±0.3 | 0.10±0.02 | .. | .. | .. |
| KI-PET-145 | 14.5 | 24.1±0.3 | 0.10±0.02 | .. | .. | .. |
| KY-PET -160 | 16 | 26.7±0.3 | 0.11±0.02 | .. | .. | .. |
| KI-PET-180 | 18 | 29.8±0.3 | 0.11±0.02 | .. | .. | .. |
| KY-PET -200 | 20 | 32.9±0.3 | 0.11±0.02 | .. | .. | .. |
| KY-PET-220 | 22 | 36.2±0.3 | 0.11±0.02 | .. | .. | .. |
| KY-PET-250 | 25 | 41.1±0.5 | 0.11±0.02 | .. | .. | .. |
| KY-PET -300 | 30 | 49.1±0.5 | 0.11±0.02 | .. | .. | .. |
| KY-PET-350 | 35 | 56.7±0.5 | 0.11±0.02 | .. | .. | .. |
| KY-PET-400 | 40 | 66.5±1.5 | 0.20±0.03 | 40±5 | 15±5 | ≤30 |
| KI-PET-450 | 45 | 72.0±1.5 | 0.20±0.03 | .. | .. | .. |
| KY-PET -500 | 50 | 84.0±1.5 | 0.20±0.03 | .. | .. | .. |
| KY-PET-635 | 63.5 | 106.0±1.5 | 0.20±0.03 | .. | .. | .. |
| KY-PET-700 | F70 | 114.0±1.5 | 0.20±0.03 | .. | .. | .. |
| KI-PET-760 | F76 | 125.0±1.5 | 0.20±0.03 | .. | .. | .. |
| KI-PET-890 | F89 | 145.0±1.5 | 0.20±0.03 | .. | .. | .. |
| KY-PET-100 | Ф100 | 156.0±1.5 | 0.20±0.03 | .. | .. | .. |
Color: black, black blue, purple, brown, red, orange red, yellow, dark green, light purple, sky blue, gray, clear white.
contact us
Related Popular Products
BHS-heat shrinkable braided sle e ving
Heat shrink braided sleeve/braided heat shrink fabric/wear-resistant noise reduction sleeve for car hose/protective sleeve for car hose/wear-resistant sleeve for car special shape
MZF-wear-resistant protective sleeve for new energy vehicles
MZF-wear-resistant protective sleeve for new energy vehicles is made of polyester monofilament and multifilament textile. It has the characteristics of fire-retardant, wear-resistant, soft, dust-proof, simple and fast operation, etc. The open design is conducive to protecting the modification, reinstallation, maintenance and repair of the internal wiring harness.
MP-10KV Busbar Heat Shrink Sleeve
MP-10KV busbar heat shrink sleeve is widely known as copper row protection tube, made of environmentally friendly PE polyolefin heat shrink material cross-linked by high energy electron beam bombardment. The products have good bending resistance, scratch resistance, and high insulation strength and electrical carbon footprint, suitable for corrosion protection and insulation of switchgear, substation busbar, busbar and electrical equipment.
DXDS Tin Copper Mono Wire Braided Screened Mesh Pipe
Tinned Copper Monofilament Braided Shielded Mesh Pipe is made of tinned copper monofilament crochet woven. The product has the characteristics of shielding, good flexibility and light specific gravity. It is often used in various electrical applications that require shielding and light weight.
Automatic transmission snap bushing
Automatic Snap Sleeve The AKP snap sleeve is made of PVC material and tower buckle,...
HSCT-R-S Series Heat Shrink Terminals with Solder Insulation 150 Degree
HSCT-R-S Series Heat Shrink Terminals with Solder Insulation 150 Degree TE models of the same class: D-1744-01~04.
BSC-G halogen-free environmentally friendly marking sleeve
BSC-G halogen-free environmentally friendly marking sleeve
NL-CB thick flat braided mesh pipe
Thick flat nylon braided sleeve is woven with special nylon flat wire, which has the flexibility and thermal insulation of ordinary PET mesh pipes, as well as the special structure of nylon flat wire. The wear resistance of this mesh pipe is more than ten times higher than that of ordinary mesh pipes.
Colored tube with EC number
Material: Soft PVC, prevent oil and other materials from corroding. Structure: EC type marking sleeve is concave inside, elastic, the diameter can be expanded with cable separation. Features: fireproof vw-1 Moderately short, suitable for special marking connection, yellow background, white background, black printed, clearly displays the wire number. One kind of EC type marking sleeves is suitable for many types of cables.
CM communication differential
It consists of metal + hot melt. The metal part is die-cast aluminum alloy sprayed with black paint, and the middle part is filled with hot melt EVA or PA adhesive. The product has four models: small, medium, large and extra large.
KY-RT fireproof winding pipe
Product Description: Material: polyethylene (PE) + flame retardant; Colors - milky white and...
RSFR-MT-125H halogen-free environmentally friendly flame retardant medical tube
Product Name：Non-environmental fireproof medical tube High temperature resistance Insulating properties Compatible with human contact Corrosion resistance High fire resistance
KFL Keflar casing
Finely crafted from Kevla fiber (aramid 1414), it has the characteristics of wear resistance, moisture resistance, high elongation, light weight and dimensional stability. It can be used to protect wires and hoses in harsh environments.
WAG-PA corrugated pipe and nylon corrugated pipe
Eco-friendly fireproof nylon corrugated pipe WAG-PA is made of environmentally friendly polyamide. This product is environmentally friendly and reliable, with perfect fire retardant effect. It has high mechanical strength, good flexibility, good bending properties, and torsion resistance. and resistance to friction. Resistant to acids, alkalis, inorganic salts, lubricants, etc. It is an ideal product for protecting the insulation of lines, water supply and gas supply. V0 level fireproof pipes and split corrugated pipes can be customized.
Heat shrink sleeve for tire mp-20 KV
mp-20kv busbar heat shrink sleeve, known as copper rod protection tube, is made of cross-linked environmentally friendly polyolefin heat shrink material, which is bombarded by high-power electron beam.
HNM High Wear Resistant Braided Mesh Pipe
HNM High Wear Resistant Braided Mesh Pipe is made of special high wear resistant monofilament weave. In addition to the elasticity, fire resistance and heat insulation of ordinary PET woven sleeve, its wear resistance is three times higher than that of ordinary PET woven mesh pipe.