Products
-
OAF aluminum foil fiberglass pipe
-
KY-DR Oil Resistant and Corrosion Resistant Heat Shrink Sleeve
-
WAG-PA corrugated pipe and nylon corrugated pipe
-
Heat shrink solder terminal HSCT-P with shielded wire
-
HSCT-Waterproof Insulated Heat Shrink Terminal
-
HUS-DW Double Wall Anti-Extrusion Heat Shrink Tubing
-
MC-flat plastic metal corrugated hose
-
HGT - High permeability waterproof heat shrink middle connection terminal
-
Military Grade Heat Shrink Marking Tube BSC-H
-
silicone braided
-
Heat shrink sleeves KY-175℃ temperature resistant 175℃ KYNAR
-
RSFR-MT-125H halogen-free environmentally friendly flame retardant medical tube
-
KY-MT-PVDF environmentally friendly flexible fluorine medical heat shrink tubing
-
HSCT-R 120 environmentally friendly heat shrink solder terminal
-
PU polyurethane PU pipe
-
BHS-heat shrinkable braided sle e ving
TPU inner tube for bicycles and mountain bikes
Product Introduction TPU inner tube for mountain bikes and bicycles. This sleeve is made of TPU material. The bushing has good toughness, high tensile strength and tensile strength; It has the characteristics of acid and alkali resistance, wear resistance, bending...
Description
marker
Product Introduction
TPU inner tube for mountain bikes and bicycles. This sleeve is made of TPU material. The bushing has good toughness, high tensile strength and tensile strength; It has the characteristics of resistance to acid and alkali, wear, bending, water, oil, mildew, shock and compression.
This high quality TPU tube inner tube for mountain bikes and bicycles has excellent weather resistance, anti-static, flame retardant and UV resistance.
advantages
The environmentally friendly TPU tube inner tube is ultra-light, reducing the area of large amounts of rotating mass (wheel sets) and making the acceleration response more sensitive. And leads to improved controllability and climbing speed. Improved puncture resistance, light weight, compact structure after folding, small size and easy to carry.
The hose, made of polyurethane PU material, has tensile resistance, strong tensile strength, high tensile strength, wear resistance, bending resistance, penetration resistance, low temperature, hydrolysis, etc., and has good elasticity and long service life.
The inner tube of the TPU tube for mountain bikes and bicycles, does not contain plasticizer, non-toxic and tasteless, is a high-performance environmentally friendly hose, the best alternative to PVC, rubber hoses.
Product specification as below:
| Model bike |
size Tire sizes |
nozzle length Valve size |
| 700c road car/ road bike |
700/18C-32C ultra-light 622-18-32c |
45mm |
| 65mm | ||
| 85mm | ||
| 584-22c-32c | 45mm | |
| 65mm | ||
| 571-22c-32c | 45mm | |
| 65mm | ||
| 520-23c-32c | 45mm | |
| 65mm | ||
| Mountain bike/MTB | 24"507 1.5-2.0 | 45mm |
| 24"507 1.5-2.0 | 45mm | |
| 26-27.5"/559-584 1.5-2.0 |
45mm | |
| 27.5"/584 (1.9-2.5) | 45mm |
Application photos of TPU inner tube pipe as below:
contact us
Related Popular Products
ZIPF-текстильная рукава плотно тканый с молнией
ZIPF-Instructions for use in ZIPF Most of the time, it's too late. More information about this, More, more information, more information and more эксплуатацией and другими характеристиками. I'm sorry, I'm sorry. It's time to change the size of your phone.
Y-Shape Special Shaped Shrink Wrap
Special heat shrink shaped sleeve to protect specially shaped wire and cable branches can be selected from suitable materials according to different requirements of the use environment, meet military and commercial multi-level requirements, easy to install and use, and waterproof with adhesive.
KY-VITON heat shrink sleeves phyton heat shrink resistance 200℃
Product Introduction It is made of high quality VITON fluorine rubber, cross-linked fluorocarbon...
KY-135℃-3X Heat Resistant 135℃ Polyolefin Heat Shrink Sleeve
Product Introduction Made of radiation cross-linked polyolefin material, superior...
Heat shrink solder terminal HSCT-P with shielded wire
Heat shrink solder terminal HSCT-P with shielded wire
HSU-PA термоусадочная трубка с клеем
More information about this type of work, Read more about it and see it again It's too late to see what happens next, and it's too late водонепроницаемой проводки резиновых проводов.
KY-YL luminous heat shrink sleeve/fluorescent heat shrink tube
Product Introduction Luminous Heat Shrink/Luminous Tube Suitable for Fishing...
Halogen-free, environmentally friendly, non-flammable LWA medical heat shrink tubing
Product Name: Eco-friendly, non-flammable LWA medical heat shrink tubing. Model: KY-MT-LWA-105R-105H Compatible with human contact, insulating properties, high tear resistance, strong environmental protection, high shrinkage rate.
HNM High Wear Resistant Braided Mesh Pipe
HNM High Wear Resistant Braided Mesh Pipe is made of special high wear resistant monofilament weave. In addition to the elasticity, fire resistance and heat insulation of ordinary PET woven sleeve, its wear resistance is three times higher than that of ordinary PET woven mesh pipe.
KY-FEP 200℃ FEP Тефлоновая термоусадочная contact
Read more FEP The most important thing is the FEP file. More...
MWAG is a metal corrugated hose made of stainless steel with a plastic coating.
MWAG is a metal corrugated hose made of stainless steel with a plastic coating. The inner layer is made of stainless steel strips 201, 304, 316 and subjected to special anti-corrosion treatment. The outer layer is made of PVC material (anti-ultraviolet, anti-aging). ).
ZCK open corrugated casing
Open corrugated sleeve is a new type of woven sleeve carefully woven from polyester multifilament and acid monofilament, which has good wear resistance, fire resistance, noise reduction and easy operation. The open structure facilitates the protection, reinstallation, maintenance and repair of the fiber optic wire harness.
Special Sealed Heat Shrink Sleeve for TXC Fiber Optic Cable Junction Box
The heat shrink tube is divided into middle wall and thick wall. The outer layer of semi-rigid PE polyolefin insulation, the inner layer of hot-melt adhesive (EVA or PA) provides good mechanical protection for the connection between the box and the cable. The inner layer of hot melt adhesive (2 types of spiral/straight coating) provides bonding and waterproof sealing. The advantage of spiral surfacing is that it does not slip during construction, has better air retention and is more suitable for irregular and large joints.
PET capacitor sleeve
Environmentally friendly PET capacitor sleeve with 125℃ temperature resistance, passed UL224 fire retardant certificate, its advantages are environmental protection, heat resistance, frost resistance, crack resistance, not easy to shrink secondary, comply with RoHS, Sony SS-00259, Reach (SVHC), PoHS and halogen-free hazardous substance control regulations, pass through oven 250C×30 seconds and constant temperature -40C×60 minutes without breaking.
KY-PTFE 260℃ PTFE Teflon Heat Shrink Sleeve
Product Introduction 260℃ Teflon Heat Shrink Sleeve is made of PTFE...
HW anti-slip pattern heat shrink sleeves
Product Introduction Made of irradiated cross-linked polyolefin, beautiful color, never...