Products
-
MCT tightly woven self-adhesive textile sleeves
-
V-shaped heat-shrinkable profiled sleeves
-
Cold pressed nylon bullet terminals with male and female thread
-
NOMEX Braided Bushing
-
KY-MT-PTFE Medical PTFE Heat Shrink Tubing
-
Non-shrink PVC Tube
-
Heat Shrink Molding Sleeve with Multiple Forks
-
Sealed MFT solder end caps, closed connection heads
-
Eco-friendly HUS Heat Shrink Tubing Containing Glue
-
TPU inner tube for bicycles and mountain bikes
-
Silicone Huggers for Candles
-
D-436, TE Tyco equivalent
-
Y-Shape Special Shaped Shrink Wrap
-
Miniature shrink caps for MINI CAP
-
Three Way Heat Shrink Molding Sleeve
-
KY-M Respirator Corrugated pipe
Teflon sleeve at a temperature of 260℃ (non-shrinkable)
Model: JY-TL, JY-TT, JY-TS
Description
marker
Product Introduction
Teflon sleeve is made of polytetrafluoroethylene (PTFE) material, which has high temperature resistance (260℃), corrosion resistance, high insulation, high strength and other characteristics. Products are used in important science and technology industries such as electronics, computers, electric heating, aerospace, military and communications, such as miniature transformers, special sensors, artificial blood vessels
Not often used characteristics:
Density: 2.16-2.20 g/cm3 Volume resistance > 1×1018
Surface resistance > 2 × 1013, arc resistance > 165 seconds without leakage
Low water absorption: water absorption < 0.1% Minimum friction coefficient: minimum friction coefficient
Surface does not stick: known hard material heads cannot stick to the surface
Non-flammability: does not burn in air and meets areas with strict fire protection requirements
Non-toxic: non-toxic and tasteless, with physiological inertness, without any harm to people and the environment
Product Specifications
| Specification
Specification |
Teflon Insulating Sleeve | |||||
| Inside diameter (mm) | Outer diameter (mm) | |||||
| AWG | MIN | NOR | MAX | JY-TS 600V | JY-TT 300V | JY-TL 150V |
| 30 | 0.25 | 0.30 | 0.38 | 0.76 | 0.76 | 0.60 |
| 28 | 0.33 | 0.38 | 0.46 | 0.84 | 0.84 | 0.68 |
| 26 | 0.41 | 0.46 | 0.53 | 0.92 | 0.92 | 0.76 |
| 24 | 0.51 | 0.56 | 0.66 | 1.16 | 1.06 | 0.86 |
| 23 | 0.58 | 0.66 | 0.74 | 1.26 | 1.16 | 0.96 |
| 22 | 0.66 | 0.71 | 0.81 | 1.31 | 1.21 | 1.01 |
| 21 | 0.74 | 0.81 | 0.89 | 1.41 | 1.31 | 1.11 |
| 20 | 0.81 | 0.86 | 0.97 | 1.66 | 1.46 | 1.16 |
| 19 | 0.91 | 0.96 | 1.07 | 1.76 | 1.56 | 1.26 |
| 18 | 1.01 | 1.07 | 1.17 | 1.87 | 1.67 | 1.37 |
| 17 | 1.14 | 1.19 | 1.32 | 1.99 | 1.79 | 1.49 |
| 16 | 1.29 | 1.34 | 1.47 | 2.14 | 1.94 | 1.64 |
| 15 | 1.45 | 1.50 | 1.65 | 2.30 | 2.10 | 1.80 |
| 14 | 1.62 | 1.68 | 1.83 | 2.48 | 2.28 | 2.08 |
| 13 | 1.83 | 1.93 | 2.05 | 2.73 | 2.53 | 2.33 |
| 12 | 2.05 | 2.16 | 2.31 | 2.96 | 2.77 | 2.56 |
| 11 | 2.31 | 2.41 | 2.57 | 3.21 | 3.01 | 2.81 |
| 10 | 2.59 | 2.69 | 2.84 | 3.49 | 3.29 | 3.09 |
| 9 | 2.90 | 3.00 | 3.15 | 4.00 | 3.76 | 3.40 |
| 8 | 3.28 | 3.38 | 3.53 | 4.38 | 4.14 | 3.78 |
| 7 | 3.65 | 3.76 | 3.94 | 4.76 | 4.52 | 4.16 |
| 6 | 4.11 | 4.22 | 4.41 | 5.22 | 4.98 | 4.72 |
| 5 | 4.62 | 4.72 | 4.95 | 5.72 | 5.48 | 5.22 |
| 4 | 5.18 | 5.28 | 5.53 | 6.28 | 6.04 | 5.78 |
| 3 | 5.81 | 5.94 | 6.20 | 6.94 | 6.70 | 6.44 |
| 2 | 6.55 | 6.68 | 6.93 | 7.68 | 7.44 | 7.18 |
| 1 | 7.34 | 7.46 | 7.75 | 8.46 | 8.22 | 7.96 |
| 0 | 8.26 | 8.38 | 8.69 | 9.38 | 9.14 | 8.88 |
Product performance property
| Project
Project |
Test method
Test Methods |
Specification requirements
Property Requirements |
| Specific Gravity Proportion | ASTM D792 | 2.16 g/cm3 |
| Tensile Strength | ASTM D638 | 24.5 MPa |
| Elongation | ASTM D638 | 350% |
| coefficient
Bending Coefficient |
ASTM D790 | 490MPa |
| impact intensity
Impact Strength |
ASTM D256+23℃-54℃ d/m | No Cracks |
| hardness
Hardness |
ASTM D2240 | 55 ShoreD |
| friction coefficient
Friction Coefficient |
0.1 | |
| melting point
Melting Point |
327℃ | |
| Use temperature
Operating Temperature |
260℃ | |
| burning ability
Flammability |
UL-224 | Superb VW-1 |
| Dielectric constant 103-106 Hz
Powers 103-106 Hz |
ASTM D150 | 2.1 |
| Dissipation factor 106Hz
Dissipation Factor106Hz |
ASMT D150 | 0.0002 |
| arc coefficient
Arc Coefficient |
ASMT D495 | >300s |
| volumetric resistivity
Volume Resistance |
ASTM D257 | > 1018 Ohm.cm |
| weather resistance
Weatherability |
Weather-o-meter (2000h) | No Change |
| resistance to
Solvent |
ASTM D543 | Excellent |
| chemical resistance
Chemical resistance |
ASTM D543 | Excellent |
| pressure resistance
Withstand Voltage |
2500V (60s), No Breakdown | By |
contact us
Related Popular Products
Silicone Huggers for Candles
This silicone cone candle holder is highly elastic, strong and durable. With anti-slip texture, it fits tightly between the candle, candle bowl and candle holder, preventing wobbling, tilting or falling and keeping the candle upright. At the same time, it can withstand high temperatures.
ZIPF-текстильная рукава плотно тканый с молнией
ZIPF-Instructions for use in ZIPF Most of the time, it's too late. More information about this, More, more information, more information and more эксплуатацией and другими характеристиками. I'm sorry, I'm sorry. It's time to change the size of your phone.
NOMEX Braided Bushing
NOMEX Braided Sleeve is made from pure NOMEX fiber. The product has strong mechanical viscosity, fire retardancy, acid resistance, corrosion resistance and light specific gravity. In extremely high temperatures (above 245°C), humidity or other harsh conditions, the casing can still maintain its good performance.
KY-PTFE 260℃ PTFE Teflon Heat Shrink Sleeve
Product Introduction 260℃ Teflon Heat Shrink Sleeve is made of PTFE...
KY-PET PET Heat Shrink Sleeve
Made of polyethylene terephthalate (PET), it is easy to use, colorful and has good insulation. It is mainly used in insulation and packaging materials for light industry, electronics and other industries, such as aluminum electrolytic capacitors, batteries, inductors, lighting tubes and other electronic components.
KY-VITON heat shrink sleeves phyton heat shrink resistance 200℃
Product Introduction It is made of high quality VITON fluorine rubber, cross-linked fluorocarbon...
MST-BZ Velcro Braided Sleeve (also called "Self-Adhesive Expanded Woven Mesh")
MST-BZ Velcro Braided Sleeve (also called "self-adhesive expanded woven mesh") is made of polyester monofilament stitched with self-adhesive (Velcro). The product has good heat dissipation, wear resistance, simple and convenient operation, etc.
HSCT-R 120 environmentally friendly heat shrink solder terminal
HSCT-R 125 Degree Eco-Friendly Heat Shrink Solder Insulation Terminal
DXDS Tin Copper Mono Wire Braided Screened Mesh Pipe
Tinned Copper Monofilament Braided Shielded Mesh Pipe is made of tinned copper monofilament crochet woven. The product has the characteristics of shielding, good flexibility and light specific gravity. It is often used in various electrical applications that require shielding and light weight.
Teflon bellows
Teflon PTFE corrugated pipe is a new high temperature corrugated pipe developed by our company. Continuous use temperature can reach 260℃. This product has low friction coefficient, low hygroscopicity, low smoke emission, high fluidity, good rigidity, electrical properties, creep resistance, flexibility, chemical resistance, atmospheric resistance, thermal stability, etc. PTFE corrugated pipe is especially suitable for anti-adhesion and chemical resistance at high temperatures.
Non-shrink PVC Tube
Product Introduction Made from special PVC material by extrusion. Tube...
Shell type PB-T (T Style protect bush)
Scope of application For products with regular specification signs Main ingredient: PVC Product preservation environment Store in a cool, dry and ventilated place.
Curved Molded Bushing
You can choose suitable materials according to different usage environment requirements to meet military and commercial multi-level requirements, easy to install and use, and waterproof with adhesive.
LED-PET explosion-proof light tube LED lights special light diffusion heat shrink tube
Explosion-proof lam LED photodiffusion heat shrink tube is made of household materials, excellent transparency, good heat dissipation effect, insulation, protect glass from breaking.
PET Battery Bushing Characteristics Table
This product is an environmentally friendly rubber hose that complies with RoHS, Sony SS-00259, Reach SVHC, RoHS and halogen-free and other relevant hazardous substance control requirements.
HNM High Wear Resistant Braided Mesh Pipe
HNM High Wear Resistant Braided Mesh Pipe is made of special high wear resistant monofilament weave. In addition to the elasticity, fire resistance and heat insulation of ordinary PET woven sleeve, its wear resistance is three times higher than that of ordinary PET woven mesh pipe.