Products
-
Halogen-free, environmentally friendly, non-flammable medical heat shrink tubing 105H
-
silicone braided
-
Elastic CAP-TX cover and dust protection
-
HNM High Wear Resistant Braided Mesh Pipe
-
MST-BZ Velcro Braided Sleeve (also called "Self-Adhesive Expanded Woven Mesh")
-
PET capacitor sleeve
-
LN-BZW zipper braided mesh tube
-
ZIPF textile sleeves tightly woven with zipper
-
LED-PET explosion-proof light tube LED lights special light diffusion heat shrink tube
-
Eco-friendly Semi-Rigid Fluorine Medical Heat Shrink Tubing
-
KY-PTFE 260℃ PTFE Teflon Heat Shrink Sleeve
-
WAG-PA new energy vehicle corrugated pipe
-
D-436, TE Tyco equivalent
-
KY-FEP 200℃ FEP Teflon Heat Shrink Sleeve
-
KY-YL luminous heat shrink sleeve/fluorescent heat shrink tube
-
KY-PA12 nylon pipe
Heat shrink sleeves KY-175℃ temperature resistant 175℃ KYNAR
Product Introduction KYNAR 175℃ Heat Shrink Pipe is a thin wall heat shrink pipe made of irradiated cross-linked special fluoropolymer PVDF (polyvinylidene fluoride), has excellent chemical and physical properties, high fire resistance, high temperature resistance...
Description
marker
Product Introduction
KYNAR 175℃ heat shrink tube is a thin wall heat shrink tube made of irradiated cross-linked special fluoropolymer PVDF (polyvinylidene fluoride), has excellent chemical and physical properties, high fire resistance, high temperature resistance, chemical solvents, friction resistance and other characteristics, applied in automobile, electronic, military, medical equipment and other fields,
Applicable industries such as: insulation protection of automobiles, motorcycle cables, bicycle brake cables, insulation protection of metal medical equipment items such as scalpel, electrocautery knife and other medical equipment.
Product Features
Semi-hard material, thin-walled design,
High temperature 175℃
Shrinkage ratio: 2:1,3:1
High fire resistance VW-1
Features a transparent tube design to allow you to see the inner layer during use
Superior strength, physical properties, chemical resistance
operating indicators
Starting temperature: 155℃
Final shrinkage temperature: 175℃
Operating temperature: -55℃~175℃
Meets the criteria:
Meet AMS-DTL-23053/18, Class 2 standard UL224 175℃ 600V VW-1
Product Specifications
| Part Number
Product model |
Nominal Size | As supplied
Before shrinkage (mm) |
After recovered After full contraction (mm) | Standard packing (m)
Standard packaging (M/Roll) |
||
| Metric (mm) | Imperial system (inch) | D Inner diameter (min)
internal diameter |
d inner diameter (max)
internal diameter |
t. Wall thickness | ||
| K U 175-012 | 1.2 | 3/64 | 1.2 | 0.6 | 0.25±0.05 | 1.2 / 100 |
| K U 175-016 | 1.6 | 1/16 | 1.6 | 0.8 | 0.25±0.05 | 1.2 / 100 |
| K U 175-024 | 2.4 | 3/32 | 2.4 | 1.2 | 0.25±0.05 | 1.2 / 100 |
| K U 175-032 | 3.2 | 1/8 | 3.2 | 1.6 | 0.25±0.05 | 1.2 / 100 |
| K U 175-048 | 4.8 | 3/16 | 4.8 | 2.4 | 0.25±0.05 | 1.2 / 100 |
| K U 175-064 | 6.4 | 1/4 | 6.4 | 3.2 | 0.30±0.08 | 1.2 / 100 |
| K U 175-095 | 9.5 | 3/8 | 9.5 | 4.8 | 0.30±0.08 | 1.2 / 100 |
| K U 175-127 | 12.7 | 1/2 | 12.7 | 6.4 | 0.30±0.08 | 1.2 / 100 |
| K U 175-191 | 19.1 | 3/4 | 19.1 | 9.5 | 0.43±0.08 | 1.2 / 100 |
| K U 175-254 | 25.4 | 1 | 25.4 | 12.7 | 0.48±0.08 | 1.2 / 100 |
| K U 175-381 | 38.1 | 11/2 | 38.1 | 19 | 0.51±0.08 | 1.2 |
| K U 175-508 | 50.8 | 2 | 50.8 | 25.4 | 0.58±0.08 | 1.2 |
Color: black, clear, red, blue
Specified size, cutting can be provided separately according to customer's requirements
Performance Metrics
| Product Performance Product Property | Requirements for indicators
Performance requirements |
Detection method
Test method |
detection data
Test Date |
| tensile strength
Tensile strength |
34.5 MPa min | ASTM D 2671 | ≧35MPa |
| Elongation | 200% min | ASTM D 638 | ≧200％ |
| heatstroke
Heat shock 275℃, 4hrs |
No cracking
dripping or flowing |
ASTM D 2671 | Pass |
| Softness at low
Low temperature flexibility -55℃, 4hrs |
No cracking | ASTM D 2671 | Pass |
| elongation after aging
Elongation after aging |
100％ | ASTM D 638 | ≧100％ |
| voltage withstand
Dielectric voltage withstand |
2500V., 60sec.
no breakdown |
ASTM D 2671 | Pass |
| volumetric self-resistance
Volume resistivity |
1014Ω. cm min | ASTMD876 | ≧1014Ω.cm |
| Corrosion resistance | No corrosion | ASTM D 2671 | Pass |
| fire resistance Flammability | BB-1 | UL 224 | Pass |
contact us
Related Popular Products
PNBT metal shielded open type tightly woven protection pipe
AutoSKT2360 has excellent shielding, open structure, convenient for installation, repair and reusable use, widely used in anti-interference signal shielding of electronics, electrical appliances and machines, railways, automobile wiring harnesses, optical fiber communications and aerospace wiring harnesses.
HSCT-Waterproof Insulated Heat Shrink Terminal
HSCT - Insulated Waterproof Heat Shrink Terminal
HNM High Wear Resistant Braided Mesh Pipe
HNM High Wear Resistant Braided Mesh Pipe is made of special high wear resistant monofilament weave. In addition to the elasticity, fire resistance and heat insulation of ordinary PET woven sleeve, its wear resistance is three times higher than that of ordinary PET woven mesh pipe.
heat shrink molding/shrink boot
KEYUACE's portfolio of heat shrink sealing components for wire harnesses is designed for...
PMI foam board
This product is divided into 7 series: Tx series PMI foam board, Th series PMI foam board, Fm series PMI foam board, W series PMI foam board, Y series PMI foam board, Zs series PMI foam board and Aa series PMI foam board.
MP-35KV Busbar Heat Shrink Sleeve
MP-35KV bus heat shrink sleeve is widely known as copper row protection tube, made of environmentally friendly PE polyolefin heat shrink material cross-linked by high energy electron beam bombardment. The products have good bending resistance, scratch resistance, and high insulation strength and electrical carbon footprint, suitable for corrosion protection and insulation of switchgear, substation busbar, busbar and electrical equipment. The products are widely used in the electric power industry.
Teflon bellows
Teflon PTFE corrugated pipe is a new high temperature corrugated pipe developed by our company. Continuous use temperature can reach 260℃. This product has low friction coefficient, low hygroscopicity, low smoke emission, high fluidity, good rigidity, electrical properties, creep resistance, flexibility, chemical resistance, atmospheric resistance, thermal stability, etc. PTFE corrugated pipe is especially suitable for anti-adhesion and chemical resistance at high temperatures.
KY-135℃-3X Heat Resistant 135℃ Polyolefin Heat Shrink Sleeve
Product Introduction Made of radiation cross-linked polyolefin material, superior...
KY-HSG cable clamp heat shrink ring gasket
Heat shrink wrap Shrink Hoop is a heat-shrinkable O-ring with exceptional...
MST-BZ Velcro Braided Sleeve (also called "Self-Adhesive Expanded Woven Mesh")
MST-BZ Velcro Braided Sleeve (also called "self-adhesive expanded woven mesh") is made of polyester monofilament stitched with self-adhesive (Velcro). The product has good heat dissipation, wear resistance, simple and convenient operation, etc.
DYF Heat Shrink Marking Sleeve with Low Smoke and High Fire Resistance
DYF Heat Shrink Marking Sleeve with Low Smoke and High Fire Resistance
KY-PFA comes with the help of KY-PFA. More
Read more about this topic Get more information (PFA). There are many more people in the world. Heats up to 260 ℃, and can be heated to 260 ℃. превосходнуэ More and more. More, more information about this More.
Curved Molded Bushing
You can choose suitable materials according to different usage environment requirements to meet military and commercial multi-level requirements, easy to install and use, and waterproof with adhesive.
Colored tube with EC number
Material: Soft PVC, prevent oil and other materials from corroding. Structure: EC type marking sleeve is concave inside, elastic, the diameter can be expanded with cable separation. Features: fireproof vw-1 Moderately short, suitable for special marking connection, yellow background, white background, black printed, clearly displays the wire number. One kind of EC type marking sleeves is suitable for many types of cables.
Silicone Huggers for Candles
This silicone cone candle holder is highly elastic, strong and durable. With anti-slip texture, it fits tightly between the candle, candle bowl and candle holder, preventing wobbling, tilting or falling and keeping the candle upright. At the same time, it can withstand high temperatures.
MP-10KV Busbar Heat Shrink Sleeve
MP-10KV busbar heat shrink sleeve is widely known as copper row protection tube, made of environmentally friendly PE polyolefin heat shrink material cross-linked by high energy electron beam bombardment. The products have good bending resistance, scratch resistance, and high insulation strength and electrical carbon footprint, suitable for corrosion protection and insulation of switchgear, substation busbar, busbar and electrical equipment.