Products
-
HUS-DW Double Wall Anti-Extrusion Heat Shrink Tubing
-
Cold pressed nylon bullet terminals with male and female thread
-
MC-flat plastic metal corrugated hose
-
MP-10KV Busbar Heat Shrink Sleeve
-
HSU-PA special semi-rigid sealed waterproof heat shrink tube with adhesive
-
KY-FEP 200℃ FEP Teflon Heat Shrink Sleeve
-
silicone braided
-
ZCK open corrugated casing
-
KY-M Respirator Corrugated pipe
-
PB-V sheath (V Style protect bush)
-
Double layer PVC hose is specially used to protect dentistry cable and dental chair and cosmetic equipment
-
BSC-G halogen-free environmentally friendly marking sleeve
-
SR-N silicone tubes
-
Wear Resistant Double Layer Self-Retracting Hydraulic Hose Protective Sleeve
-
KY-PA12 nylon pipe
-
Miniature shrink caps for MINI CAP
HSCT-Waterproof Insulated Heat Shrink Terminal
HSCT - Insulated Waterproof Heat Shrink Terminal
Description
marker
Product Description
The outer layer of HSCT Insulation Waterproof Heat Shrink Terminal is made of polyolefin heated hot melt adhesive, which provides excellent insulation protection, waterproofing and corrosion protection. The copper tube in the middle of the terminal is a high purity copper tube with excellent properties. electrical conductivity. It is often used to protect wires, wiring harnesses, and electronic connectors to improve locking and anti-vibration functions in harsh environments.
Compared with conventional connectors, HSCT insulated waterproof heat shrink terminals (also known as waterproof intermediate connectors) are more durable, easy to install and have low installation costs.
Functions
Shrinkage ratio 3;1, three colors: red, blue and yellow.
PA hot melt adhesive has excellent waterproof performance, excellent elongation performance and mechanical damage resistance.
Make sure the corrugated outer layer is intact and has good electrical conductivity.
High elasticity, the pipe is not easy to deform.
operating indicators
Starting temperature: 80℃, final shrinking temperature: 130℃, working temperature: -55℃~125℃.
product characteristics
| Part Number
Product number |
Cable Size | heat shrink tube（mm） | Brass copper pipe（mm） | COLOR
color |
Packing
Packaging |
|||||
| A.W.G. | mm2 | ID
internal diameter |
O.D.
Outer diameter |
L
length |
O.D.
Outer diameter |
ID
internal diameter |
L
length |
Pcs/bag | ||
| HSCT-0.5 | 26-24 | 0.2-0.5 | 3.2 | 4.1 | 26 | 2.1 | 1.3 | 10 | yellow | 2000 |
| HSCT-01 | 22-18 | 0.5-1.0 | 4.7 | 5.8 | 36.0 | 3.8 | 1.7 | 15 | red | 1000 |
| HSCT-02 | 16-14 | 1.5-2.5 | 5.7 | 6.9 | 36.0 | 4.8 | 2.4 | 15 | blue | 1000 |
| HSCT-03 | 12-10 | 4.0-6.0 | 6.7 | 8.0 | 42.0 | 5.7 | 3.6 | 15 | yellow | 1000 |
| HSCT-05 | 8 | 8 | 8.1 | 9.5 | 42.0 | 6.8 | 5.1 | 20 | yellow | 1000 |
| All purchased products are made of 99% pure copper, and the thickness of the copper tube on one side is 0.8-1.0 mm (the thickness of cheaper tubes on the market can be 0.4 mm).
This product is an intermediate heat shrink tube: the operating voltage is 600V, the limit voltage (voltage breakdown resistance is 2500V), and the current resistance is the square number of the body multiplied by 5. The current unit is A. For example, according to the HSCT-05 specification, the current resistance of an area of 8.0 square meters is 40A. |
||||||||||
| Product selection
Product selection |
Color
color |
Cable Size
Размер провода AWG，(m㎡) |
Bolt specification
Characteristics of bolts |
Wide
Ширина |
Length
длинный |
AS supplied
SIZE Размер до усадки |
|
| Inch
имперский |
mm
Metrics |
¢ (mm) | |||||
| R-type Heat Shrink Terminal (also known as Round Terminal) | |||||||
| HSCT-1.25-01R | red | 22-18, ( 0.5-1.0 ) | ＃6 | 3.7 | 6.6 | 31.5 | 4.7 |
| HSCT-1.25-02R | red | 22-18, ( 0.5-1.0 ) | ＃8 | 4.3 | 8.0 | 33.5 | 4.7 |
| HSCT-1.25-03R | red | 22-18, ( 0.5-1.0 ) | ＃10 | 5.3 | 8.0 | 33.5 | 4.7 |
| HSCT-1.25-04R | red | 22-18, ( 0.5-1.0 ) | ＃1/4 | 6.4 | 11.6 | 39.5 | 4.7 |
| HSCT-1.25-05R | red | 22-18, ( 0.5-1.0 ) | ＃5/16 | 8.4 | 12.0 | 39.5 | 4.7 |
| HSCT-1.25-06R | red | 22-18, ( 0.5-1.0 ) | ＃3/8 | 10.0 | 14.5 | 43.0 | 4.7 |
| HSCT-2.0-01R | blue | 16-14, ( 1.5-2.5 ) | ＃6 | 3.7 | 6.6 | 28.5 | 5.7 |
| HSCT-2.0-02R | blue | 16-14, ( 1.5-2.5 ) | ＃8 | 4.3 | 8.0 | 31.5 | 5.7 |
| HSCT-2.0-03R | blue | 16-14, ( 1.5-2.5 ) | ＃10 | 5.3 | 8.0 | 33.5 | 5.7 |
| HSCT-2.0-04R | blue | 16-14, ( 1.5-2.5 ) | ＃1/4 | 6.4 | 11.6 | 39.5 | 5.7 |
| HSCT-2.0-05R | blue | 16-14, ( 1.5-2.5 ) | ＃5/16 | 8.4 | 12.0 | 39.5 | 5.7 |
| HSCT-2.0-06R | blue | 16-14, ( 1.5-2.5 ) | ＃3/8 | 10.0 | 14.5 | 43.0 | 5.7 |
| HSCT-5.5-01R | yellow | 12-10， ( 4.0-6.0 ) | ＃8 | 4.3 | 8.0 | 35.0 | 6.7 |
| HSCT-5.5-02R | yellow | 12-10， ( 4.0-6.0 ) | ＃10 | 5.3 | 9.5 | 35.0 | 6.7 |
| HSCT-5.5-03R | yellow | 12-10， ( 4.0-6.0 ) | ＃1/4 | 6.4 | 11.6 | 43.0 | 6.7 |
| HSCT-5.5-04R | yellow | 12-10， ( 4.0-6.0 ) | ＃5/16 | 8.4 | 12.0 | 43.0 | 6.7 |
| HSCT-5.5-05R | yellow | 12-10， ( 4.0-6.0 ) | ＃3/8 | 10.0 | 14.5 | 43.0 | 6.7 |
| Product selection
Product selection |
Color
color |
Cable Size
Размер провода AWG，(m㎡) |
Bolt specification
Characteristics of bolts |
Wide
Ширина |
Length
длинный |
AS supplied
SIZE Размер до усадки |
|||||
| Inch
имперский |
mm
Metrics |
¢ (mm) | |||||||||
| Термоусадочная клемма Y-типа | |||||||||||
| HSCT-1.25-01Y | red | 22-18, ( 0.5-1.0 ) | ＃6 | 3.7 | 6.4 | 33 | 4.7 | ||||
| HSCT-1.25-02Y | red | 22-18, ( 0.5-1.0 ) | ＃8 | 4.3 | 6.4 | 33 | 4.7 | ||||
| HSCT-1.25-03Y | red | 22-18, ( 0.5-1.0 ) | ＃10 | 5.3 | 9.5 | 33 | 4.7 | ||||
| HSCT-2.0-01Y | blue | 16-14, ( 1.5-2.5 ) | ＃6 | 3.7 | 6.4 | 33 | 5.7 | ||||
| HSCT-2.0-02Y | blue | 16-14, ( 1.5-2.5 ) | ＃8 | 4.3 | 6.4 | 33 | 5.7 | ||||
| HSCT-2.0-03Y | blue | 16-14, ( 1.5-2.5 ) | ＃10 | 5.3 | 9.5 | 33 | 5.7 | ||||
| HSCT-5.5-01Y | yellow | 12-10， ( 4.0-6.0 ) | ＃6 | 3.7 | 6.4 | 35 | 6.7 | ||||
| HSCT-5.5-02Y | yellow | 12-10， ( 4.0-6.0 ) | ＃8 | 4.3 | 6.4 | 35 | 6.7 | ||||
| HSCT-5.5-03Y | yellow | 12-10， ( 4.0-6.0 ) | ＃10 | 5.3 | 9.5 | 35 | 6.7 | ||||
| Термоусадочная клемма типа «мама» вилочной типа Insert characteristics | |||||||||||
| HSCT-1.25-01M | red | 22-18, ( 0.5-1.0 ) | 0.25*0.032 | 6.48*0.8 | 6.6 | 33 | 4.7 | ||||
| HSCT-2.0-02M | yellow | 16-14, ( 1.5-2.5 ) | 0.25*0.032 | 6.48*0.8 | 6.6 | 33 | 5.7 | ||||
| HSCT-5.5-03M | yellow | 12-10， ( 4.0-6.0 ) | 0.25*0.032 | 6.48*0.8 | 6.6 | 33 | 6.7 | ||||
| Термоусадочная клемма типа "папа" вилочной типа | |||||||||||
| HSCT-1.25-01G | red | 22-18, ( 0.5-1.0 ) | 0.25*0.032 | 6.48*0.8 | 6.6 | 33 | 4.7 | ||||
| HSCT-2.0-02G | blue | 16-14, ( 1.5-2.5 ) | 0.25*0.032 | 6.48*0.8 | 6.6 | 33 | 5.7 | ||||
| HSCT-5.5-03G | yellow | 12-10， ( 4.0-6.0 ) | 0.25*0.032 | 6.48*0.8 | 6.6 | 33 | 6.7 | ||||
The product picture is as follows
technical specifications
| Product Property
Product performance |
Test method
Detection method |
Test Date
Test data |
|
| Unaged | Tensile strength
Tensile strength |
room temperature
room temperature |
≧15.9MPa |
| Elongation
Elongation |
≧200% | ||
| Aging | Tensile strength
Tensile strength |
159℃/7 days
159℃/7 days |
≧11.6MPa |
| Elongation | ≧100% | ||
| Voltage withstand and breakdown voltage (Unaged)
Withstand voltage and breakdown voltage (not aged) |
room temperature
room temperature |
2500V,60sec,
No breakdown 2.5 kV, 60 seconds, no breakdown |
|
| Voltage withstand and breakdown voltage (aged)
Withstand voltage and breakdown voltage (aging) |
159℃/7 days
159℃/7 days |
Withstand 2.5KV for 1minute and breakdown at least half of unaged breaddown voltage
Withstand a voltage of 2.5 kV for 60 seconds, and the breakdown voltage should be at least half the breakdown voltage in the non-aging state. |
|
| Copper corrosion | pass | ||
| Copper stable | No sign of degradation Min.Elongation 100%
No degradation elongation ≥100% |
||
| cold bend | -30℃/3Hour | No crack | |
| Maximum secant modulus (2%) | - | 250MPa | |
| Volume resistance | - | ≧1014Ω-cm | |
| Heatstroke | 250℃/4hour | No crack | |
contact us
Related Popular Products
How to use HUS-DW in the Video
More information: This is the most important thing in the world. Read more...
Colored tube with EC number
Material: Soft PVC, prevent oil and other materials from corroding. Structure: EC type marking sleeve is concave inside, elastic, the diameter can be expanded with cable separation. Features: fireproof vw-1 Moderately short, suitable for special marking connection, yellow background, white background, black printed, clearly displays the wire number. One kind of EC type marking sleeves is suitable for many types of cables.
JLBZ - Nylon Braided Sleeves
(The material is also a type of nylon, but the appearance is like cotton thread, one by one structure, not one by one wire diameter, such as 0.2-0.25mm unit, can only be considered one by one thread). Nylon Braided Tube is made from Army Green Nylon Fiber. The products have the special advantages of softness, light weight and good environmental resistance, in addition, in the multi-branch cable assembly, the processing of the ends of the nylon silk sleeve is relatively easy, the seam and tie method can be used to ensure the bifurcation is soft and easy, has a good protective effect on the wire harness inside the cavity with a narrow space.
Heat shrink wrap for one finger
Product Specification Version: A/0 Client name: Product name: Thermo...
Heat shrink sleeve for tire mp-20 KV
mp-20kv busbar heat shrink sleeve, known as copper rod protection tube, is made of cross-linked environmentally friendly polyolefin heat shrink material, which is bombarded by high-power electron beam.
KY-MT-90R-NV-X Halogen-free, environmentally friendly, non-flammable medical heat shrink tubing
Product Name: Halogen-free, environmentally friendly, non-flammable medical heat shrink tubing. Model: KY-MT-90R-NV-X Compatible with human contact, insulating properties, high wear resistance, strong environmental protection, high shrinkage.
KY-FEP 200℃ FEP Тефлоновая термоусадочная contact
Read more FEP The most important thing is the FEP file. More...
DXQZ Tinned Copper Lightweight Shielded Network Pipe
Tinned copper lightweight screened mesh (copper yarn mesh) is made of special copper wire. The products have the advantages of electromagnetic signal shielding, light weight and good softness. Compared with commonly used tinned copper woven mesh, this product can reduce the overall weight of the finished product.
KY-135℃-3X Heat Resistant 135℃ Polyolefin Heat Shrink Sleeve
Product Introduction Made of radiation cross-linked polyolefin material, superior...
Eco-friendly HUS Heat Shrink Tubing Containing Glue
Product Description The outer layer consists of a double layer of fire-resistant insulating...
ZSC-Self-rolling open type braided sleeve
ZSC—Open Coil Braided Sleeve is a new type of wire protective sleeve made of polyester monofilament and polyester multifilament, has good heat dissipation, flame retardant, wear resistance, simple and convenient operation, etc., the open design is conducive to wire reinstallation, maintenance and repair.
Curved Molded Bushing
You can choose suitable materials according to different usage environment requirements to meet military and commercial multi-level requirements, easy to install and use, and waterproof with adhesive.
KY-RT fireproof winding pipe
Product Description: Material: polyethylene (PE) + flame retardant; Colors - milky white and...
KY-PA12 nylon pipe
Product Introduction Nylon pipe (KY-PA12) is made of new German material...
YST-H - High Speed Heat Shrink Tubing for Compressors (Also known as High Shrink Polyester Heat Shrink Hose)
YST-H-High Speed Polyester Heat Shrink Tubing has proven extremely reliable insulation properties, ultra-thin wall thickness, high dielectric performance and non-stop performance at 150°C. Polyester film can be used in combination with plastic film, paper and other materials and spiral wrapped. Therefore, when you need composite pipes.