Products
-
Telescopic braided sleeve KY-PPS
-
KFL Keflar casing
-
Heat shrink sleeves KY-175℃ temperature resistant 175℃ KYNAR
-
WAG-PA new energy vehicle corrugated pipe
-
ZIPF textile sleeves tightly woven with zipper
-
BSC-G halogen-free environmentally friendly marking sleeve
-
KY-CAR Car Braided Storage Tube
-
Silicone Huggers for Candles
-
silicone braided
-
KY-MT-PTFE Medical PTFE Heat Shrink Tubing
-
PNBT metal shielded open type tightly woven protection pipe
-
SR-N silicone tubes
-
Colored tube with EC number
-
HW anti-slip pattern heat shrink sleeves
-
TLFZ-non-shrink polyester textile sleeves
-
Military Grade Heat Shrink Marking Tube BSC-H
KY-FEP 200℃ FEP Тефлоновая термоусадочная contact
Product Introduction FEP Teflon heat shrink sleeve is made of polytetrafluoroethylene and propylene (FEP). The product is usually used for: 1. Insulate and protect electronic components, resistors, capacitors and thermocouples in high temperature and oily environments. 2 Mechanical...
Description
marker
Product Introduction
FEP Teflon heat shrink sleeve is made of polytetrafluoroethylene and propylene (FEP). The product is usually used for:
1. Insulate and protect electronic components, resistors, capacitors and thermocouples in high temperature and oily environments.
2 Mechanical protection of various metal wires, such as insulating, protecting and reinforcing wire ends, wiring and terminals.
Usage:
1 Rollers and roller coatings in mechanical engineering (e.g. office equipment, papermaking equipment, printing and dyeing equipment, printing presses, etc.)
As well as coating of conveyor belts and conveyor belt rollers (non-stick oil stains).
2 Insulating shells, engine rotor insulation, magma sample preparation in water treatment/oil fields and other industries.
3 can be used to prevent fluorescent lamps from exploding, as shown in the picture below:
Functions:
1 Non-flammable, non-sticky, environmentally friendly, non-polluting, UV resistant:
Does not burn in air (oxygen index>95VOL%), adhesion of highly viscous liquids to objects is practically absent.
It won't stick.
2 Chemical resistance:
Only the fluorine element and alkali metals react with it at high temperatures, and it reacts with all other concentrated and dilute inorganic organic acids and bases.
Esters have no effect
3 Electricity:
The dielectric constant viscosity at high and low temperatures 60–60 MHz is 2.1. Even if the surface is damaged during diving, there will be no consequences.
Create conductive paths.
4 Volume resistance > 1018 Ωm, surface resistance > 1013 Ω, arc resistance > 165 seconds without leakage
5. Low friction: dynamic friction coefficient 0.2-0.3.
6. High and low temperature resistance: -200--200℃.
7. Shrinkage ratio: 1.7:1, longitudinal shrinkage: ≤8%.
Comply with standards:
Complies with SAE-AMS-DTL-23053/12.
operating indicators
Final shrinkage temperature: 260℃.
Working temperature: -55℃～200℃.
Specification as below:
| Part Number
|
As supplied (mm) | After recovered (mm) | Standard
Packing (M) |
||
| Inside diameter | Wall thickness | D(max)
Inside diameter |
t Wall thickness | ||
| KY-FEP-0020 | 2.0 | 0.07-0.15 | 1.6 | 0.15-0.2 | 1 |
| KY-FEP-0030 | 3.0 | 0.07-0.15 | 2.2 | 0.15-0.2 | 1 |
| KY-FEP-0040 | 4.0 | 0.15-0.2 | 3.0 | 0.2-0.25 | 1 |
| KY-FEP-0045 | 4.5 | 0.15-0.2 | 3.3 | 0.2-0.25 | 1 |
| KY-FEP-0055 | 5.5 | 0.15-0.2 | 4.3 | 0.2-0.25 | 1 |
| KY-FEP-0070 | 7.0 | 0.15-0.28 | 5.1 | 0.2-0.35 | 1 |
| KY-FEP-0079 | 7.9 | 0.15-0.28 | 6.0 | 0.2-0.35 | 1 |
| KY-FEP-0106 | 10.6 | 0.15-0.36 | 7.4 | 0.3-0.45 | 1 |
| KY-FEP-0125 | 12.5 | 0.15-0.36 | 8.8 | 0.3-0.45 | 1 |
| KY-FEP-0145 | 14.5 | 0.15-0.36 | 10.7 | 0.3-0.45 | 1 |
| KY-FEP-0173 | 17.3 | 0.15-0.36 | 12.8 | 0.4-0.5 | 1 |
| KY-FEP-0190 | 19 | 0.35 | 16.5 | 0.5 | 2 |
| KY-FEP-0210 | 21 | 0.35 | 18.5 | 0.5 | 2 |
| KY-FEP-0240 | 24 | 0.35 | 19.5 | 0.5 | 2 |
| KY-FEP-0260 | 26 | 0.35 | 21.5 | 0.5 | 2 |
| KY-FEP-0300 | 30 | 0.35 | 24 | 0.5 | 2 |
| KY-FEP-0330 | 33 | 0.35 | 27 | 0.5 | 2 |
| KY-FEP-0800 | 80-0.5 | 0.4+/-0.05 | 66 | 0.5+/-0.05 | 1 |
The above maximum specifications can reach an internal diameter of 200mm.
Color: transparent
Specified sizes, cutting can be provided separately according to customer needs and special requirements.
Performance Metrics
| Product Property | Performance requirements | Test method | Test Date |
| Longitudinal shrinkage | ≤10% | ASTM D 2671 | ≤ 8% |
| Tensile strength | 11MPa min | ASTM D 638 | ≧12.4MPa |
| Elongation at break | 200％ min | ASTM D 638 | ≧300％ |
| Heat shock 300℃,4hrs | No cracking
dripping or flowing |
ASTM D 2671 | Pass |
| Elongation after aging
(250℃, 168hrs) |
200％ min | ASTM D 638 | ≧250％ |
| Dielectric voltage withstand | 2500V., 60sec,
no breakdown |
ASTM D 2671 | Pass |
contact us
Related Popular Products
MZF/D is a special self-rolling double-layer high-wear-resistant textile protective sleeve for automotive high-voltage wiring harness
Automotive high voltage wiring harness special high wear-resistant self-rolled double-layer textile protective sleeve, made of polyester monofilament + polyester multifilament, double-layer textile protective sleeve has excellent wear resistance and can provide double protection for the wiring harness. Currently, the most widely used industry is the protection of automotive high voltage wire harnesses.
D-436, TE Tyco equivalent
Sealed in-line compression fittings provide long-lasting performance and exceptional reliability in harsh environments. These compression fittings feature a lightweight, low-profile design for applications where space savings and environmental protection are critical.
Heat shrink sleeve for tire mp-20 KV
mp-20kv busbar heat shrink sleeve, known as copper rod protection tube, is made of cross-linked environmentally friendly polyolefin heat shrink material, which is bombarded by high-power electron beam.
KY-YL luminous heat shrink sleeve/fluorescent heat shrink tube
Product Introduction Luminous Heat Shrink/Luminous Tube Suitable for Fishing...
ZIP-PB Screened type protective sleeve with zipper
ZIP-PB shielding protective sleeve with zipper is made of tinned copper hook wire mesh, fire-resistant fabric, zipper composite. It features highly sensitive electromagnetic interference shielding, noise reduction, dustproof and wear-resistant. Because the product itself is equipped with a zipper, it is convenient to install and dismantle and convenient to use.
PU polyurethane PU pipe
Product Introduction The hose, made of polyurethane PU material, has...
JLBZ - Nylon Braided Sleeves
(The material is also a type of nylon, but the appearance is like cotton thread, one by one structure, not one by one wire diameter, such as 0.2-0.25mm unit, can only be considered one by one thread). Nylon Braided Tube is made from Army Green Nylon Fiber. The products have the special advantages of softness, light weight and good environmental resistance, in addition, in the multi-branch cable assembly, the processing of the ends of the nylon silk sleeve is relatively easy, the seam and tie method can be used to ensure the bifurcation is soft and easy, has a good protective effect on the wire harness inside the cavity with a narrow space.
Halogen-free, environmentally friendly, non-flammable medical heat shrink tubing 105H
Product Name: Environmentally friendly, non-flammable medical heat shrink tubing. Model: KY-MT-105R Insulating properties, high flexibility, suitable for human contact, strong environmental protection.
OFPT single-core fiber optic protective
Consists of clear heat shrink tube, clear hot melt tube and reinforced stainless steel rod. Suitable for connectors, adapters, fiber optic patch cords, etc.
TLFZ-non-shrink polyester textile sleeves
TLFZ-non-shrink polyester textile sleeves are made from high-performance polyester multifilament. The product has excellent tensile strength, anti-corrosion and explosion-proof, anti-trition and noise-reducing, moisture-absorbing and dust-proof.
BJ-BZ Platinum Braided Mesh Tube
Platinum Braided Mesh Tube is carefully woven with metallic colored polyester thread. The product has good characteristics of heat reflection and strong metallic feeling. At the same time, the product has the characteristics of light weight, smooth surface and excellent gloss.
Automatic transmission snap bushing
Automatic Snap Sleeve The AKP snap sleeve is made of PVC material and tower buckle,...
KY-HSG cable clamp heat shrink ring gasket
Heat shrink wrap Shrink Hoop is a heat-shrinkable O-ring with exceptional...
Industrial Fireproof Protective Case for Robot
Product Application: Automated industrial shell casing pipe Robot tu...
Halogen-free, environmentally friendly, non-flammable LWA medical heat shrink tubing
Product Name: Eco-friendly, non-flammable LWA medical heat shrink tubing. Model: KY-MT-LWA-105R-105H Compatible with human contact, insulating properties, high tear resistance, strong environmental protection, high shrinkage rate.