Products
-
NLPA Multifilament Nylon Braided Mesh Tube
-
KYPET/HFR High Fire Retardant Braided Mesh Pipe
-
HSU-PA special semi-rigid sealed waterproof heat shrink tube with adhesive
-
D-436, TE Tyco equivalent
-
T-shaped shrink sleeve
-
HSCT-R 120 environmentally friendly heat shrink solder terminal
-
KY-MT-PVDF environmentally friendly flexible fluorine medical heat shrink tubing
-
HUS-GR Military Standard Double Wall Fireproof Pipe Containing Adhesive
-
Highly transparent TPU hose
-
PE plastic mesh cover
-
Telescopic braided sleeve KY-PPS
-
CFT carbon fiber
-
Heat Shrink Cover with Adhesive for WCAP Cable Terminal
-
WAG-PA new energy vehicle corrugated pipe
-
PMI foam board
-
MST-BZ Velcro Braided Sleeve (also called "Self-Adhesive Expanded Woven Mesh")
Halogen-free, environmentally friendly, non-flammable LWA medical heat shrink tubing
Product Name: Eco-friendly, non-flammable LWA medical heat shrink tubing.
Model: KY-MT-LWA-105R-105H
Compatible with human contact, insulating properties, high tear resistance, strong environmental protection, high shrinkage rate.
Description
marker
Product Description
KY-MT-LWA-105R Halogen-free, environmentally friendly, non-flammable medical heat shrink tubing LWA is a cross-linked modified polyolefin heat shrink tubing designed for use as an adjuvant in minimally invasive products. Its homogeneous structure. Helps this. Consistency and high performance result in a product virtually free of defects, holes, seams, cracks and stains. MT-LWA provides adjustable shrinkage ratios up to 4:1. MT-LWA-105H has unique peel-off and axial tear properties, which can be easily removed at a certain temperature, making it the best choice for use.
Functions
◎Shrinkage ratio: >2:1
◎Using temperature: -40°C to +105°C.
◎Initial shrinkage temperature: ≥+90℃.
◎Good transparency
◎Excellent electrical insulating properties
◎Complies with ISO10993-1.
◎Easy to remove after tightening, good axial expansion when broken
◎No heavy metals
◎Environmental protection standards: RoHS compliance.
◎Standard color: transparent.
| productivity | Test methods | index |
| Tensile strength/MPa | ASTM D 2671 | ≥10.4 |
| Elongation at break/% | ASTM D 2671 | ≥200 |
| Pressure test | UL224 | 4000V, without breakdown in 1 min. |
| Volume resistance/Ohm cm | IEC 60093 | ≥1014 |
Specifications table
| model |
Delivery inner diameter |
Fully reduced size(mm) | |
| inner diameter(D) | wall thickness | ||
| KY-MT-LWA-105R-0.8 | 1.02±0.13 | ≤0.35 | 0.28±0.05 |
| KY-MT-LWA-105R-1.2 | 1.40±0.13 | ≤0.50 | 0.41±0.08 |
| KY-MT-LWA-105R-1.6 | 1.83±0.13 | ≤0.70 | 0.51±0.08 |
| KY-MT-LWA-105R-2.4 | 2.72±0.20 | ≤1.05 | 0.51±0.08 |
| KY-MT-LWA-105R-3.2 | 3.56±0.25 | ≤1.45 | 0.51±0.08 |
| KY-MT-LWA-105R-4.8 | 5.21±0.25 | ≤2.20 | 0.51±0.08 |
| KY-MT-LWA-105R-6.4 | 6.99±0.38 | ≤3.00 | 0.64±0.08 |
| KY-MT-LWA-105R-9.5 | 10.54±0.51 | ≤4.30 | 0.64±0.08 |
contact us
Related Popular Products
MC-Flat Cover Corrugated Metal Hose
Flat coated stainless steel plastic hose is used as wire and cable protection pipe for automatic instrument wire, cables and signals, has good flexibility, corrosion resistance, high temperature resistance, wear resistance and tensile strength.
KY-MT-PTFE Medical PTFE Heat Shrink Tubing
Product Name: Medical PTFE Heat Shrink Tubing Model：KY-MT-PTFE
Special Sealed Heat Shrink Sleeve for TXC Fiber Optic Cable Junction Box
The heat shrink tube is divided into middle wall and thick wall. The outer layer of semi-rigid PE polyolefin insulation, the inner layer of hot-melt adhesive (EVA or PA) provides good mechanical protection for the connection between the box and the cable. The inner layer of hot melt adhesive (2 types of spiral/straight coating) provides bonding and waterproof sealing. The advantage of spiral surfacing is that it does not slip during construction, has better air retention and is more suitable for irregular and large joints.
Non-shrink PVC Tube
Product Introduction Made from special PVC material by extrusion. Tube...
Heat Shrink Molding Sleeve with Multiple Forks
KEYUACE Heat Shrink Cable Plugs provide stress protection for cable assemblies used in harsh environments. These products help prevent the osmotic effects of salt water, fuels and petroleum-based solvents.
FZT anti-noise protective sleeve
The anti-noise protective sleeve is made of polymonifil and multifilament in a self-rolling form. The product has good fire resistance, noise reduction, wear resistance, simple and convenient operation, etc. The open design is conducive to protecting the wiring harness, reinstallation, maintenance and repair.
TPU inner tube for bicycles and mountain bikes
Product Introduction TPU inner tube for mountain bikes and bicycles. This one in...
protective tube for car transmission cable
The car towing cable protection tube adopts a three-layer composite structure consisting of an inner polyoxymethylene (POM) tube, 18 longitudinal steel wires and an outer layer of PA6 polyamide. Its inner wall is smooth, operates silently, combines high strength, wear resistance and flexibility, and is well suited to extreme high and low temperatures.
MP-35KV Busbar Heat Shrink Sleeve
MP-35KV bus heat shrink sleeve is widely known as copper row protection tube, made of environmentally friendly PE polyolefin heat shrink material cross-linked by high energy electron beam bombardment. The products have good bending resistance, scratch resistance, and high insulation strength and electrical carbon footprint, suitable for corrosion protection and insulation of switchgear, substation busbar, busbar and electrical equipment. The products are widely used in the electric power industry.
BHS-heat shrinkable braided sle e ving
Heat shrink braided sleeve/braided heat shrink fabric/wear-resistant noise reduction sleeve for car hose/protective sleeve for car hose/wear-resistant sleeve for car special shape
KY-PA12 nylon pipe
Product Introduction Nylon pipe (KY-PA12) is made of new German material...
HSCT-Waterproof Insulated Heat Shrink Terminal
HSCT - Insulated Waterproof Heat Shrink Terminal
PE plastic mesh cover
Product Name: Woven Mesh Shells Specification: Various specifications, can be customized Color: can be customized Material: soft polyethylene, dense and easy to store, can be reused and recycled, economical and environmentally friendly.
MZF-wear-resistant protective sleeve for new energy vehicles
MZF-wear-resistant protective sleeve for new energy vehicles is made of polyester monofilament and multifilament textile. It has the characteristics of fire-retardant, wear-resistant, soft, dust-proof, simple and fast operation, etc. The open design is conducive to protecting the modification, reinstallation, maintenance and repair of the internal wiring harness.
Teflon bellows
Teflon PTFE corrugated pipe is a new high temperature corrugated pipe developed by our company. Continuous use temperature can reach 260℃. This product has low friction coefficient, low hygroscopicity, low smoke emission, high fluidity, good rigidity, electrical properties, creep resistance, flexibility, chemical resistance, atmospheric resistance, thermal stability, etc. PTFE corrugated pipe is especially suitable for anti-adhesion and chemical resistance at high temperatures.
heat shrink molding/shrink boot
KEYUACE's portfolio of heat shrink sealing components for wire harnesses is designed for...