Products
-
KY-CAR Car Braided Storage Tube
-
YST-H - High Speed Heat Shrink Tubing for Compressors (Also known as High Shrink Polyester Heat Shrink Hose)
-
Sealed MFT solder end caps, closed connection heads
-
KY-UPVC Heavy Duty Solar Corrugated Tube
-
MZF/D is a special self-rolling double-layer high-wear-resistant textile protective sleeve for automotive high-voltage wiring harness
-
Number marker type N
-
KY-135℃-3X Heat Resistant 135℃ Polyolefin Heat Shrink Sleeve
-
ZSC-Self-rolling open type braided sleeve
-
Spiral pipe LX-PP
-
WAG-PA new energy vehicle corrugated pipe
-
PB-V sheath (V Style protect bush)
-
KY-anti-crease heat shrink PVC pipe
-
Road accident carpet protective sleeve
-
Miniature shrink caps for MINI CAP
-
KY-FEP 200℃ FEP Teflon Heat Shrink Sleeve
-
Polyperfluoropropylene medical heat shrink tubing KY-MT-FEP
PET Battery Bushing Characteristics Table
This product is an environmentally friendly rubber hose that complies with RoHS, Sony SS-00259, Reach SVHC, RoHS and halogen-free and other relevant hazardous substance control requirements.
Description
marker
More about the product
This product is an environmentally friendly rubber hose that complies with RoHS, Sony SS-00259, Reach SVHC, RoHS and halogen-free and other relevant hazardous substance control requirements.
This product is an environmentally friendly rubber hose that complies with the Control of Hazardous Substances Regulations, Sony ss-00259, Reach, Substances of High Concern (SVHC), Rox, Halogen Free and other relevant Control of Hazardous Substances regulations.
Specifications
| performance table Performance T able | ||||
| serial number No |
Project Item | Test method Test method |
unit Unit |
Performance |
| 1 | Structural formula
Structural molecular formula |
-- | -- | (H2, -CH)n-Cl. |
| 2 | Appearance
exterior appearance |
-- | -- | No contamination, foreign objects, etc. no contaminate matter included |
| 3 | Appearance (insoluble substances)
Undissolved particular |
-- | mm2 | ≤0.7 |
| 4 | Curved (280mm) camera | -- | mm | Below Ø8 (under Ø8) < 3.0 above Ø10 (above Ø10) < 3.5 |
| 5 | density density | ASTM D792 | G/cm3 | 1.2~1.4 |
| 6 | tensile strength
tensile strength |
ASTM D638 | N/m2 | > 107 |
| 7 | elongation at break
break elongation |
ASTM D638 | % | > 42% |
| 8 | water absorption
water absorption |
ASTM D570 | % | < 2.0% |
| 9 | dielectric strength
dielectric force |
ASTM D149 | KV/mm | > 15 |
| 10 | surface specific
surface resistivity |
ASTM D257 | Q | >109 |
| 11 | volumetric resistivity | ASTM D257 | Q cm | >1014 |
| Specifications Specification A nd P performance T able | |||||
| Specification Specification |
Folding Diameter (mm) Flat width |
Thickness (mm) Thickness |
Shrinkage coefficient in direction of loss (%) Lateral shrinkable ratio |
Longitudinal shrinkage (%) Longitudinal shrinkable ratio |
Oven (180±2)℃
× 15 minutes |
| Ø8 | 13.9 soil 0.2 | 0.07 soil 0.02 | 47 soil 4 | 8 soil 3 | nickel-oxide electrohong Nickel metal hydraulic battery |
| Ø10 | 17.0 soil 0.2 | 0.07 soil 0.02 | 47 soil 4 | 8 soil 3 | AAA |
| Ø14 | 23.2 Soil 0.3 | 0.07 soil 0.02 | 47 soil 4 | 8 soil 3 | 14500 |
| Ø18 | 29.8 soil 0.3 | 0.08 soil 0.02 | 47 soil 4 | 8 soil 3 | 18650 |
| Ø18 | 30.2 soil 0.3 | 0.07 soil 0.02 | 47 soil 4 | 8 soil 3 | 18650 |
| Ø21 | 35.2 soil 0.3 | 0.07 soil 0.02 | 47 soil 4 | 8 soil 3 | 21700 |
| Ø25.4 | 42.0 soil 0.5 | 0.10 soil 0.02 | 47 soil 4 | 8 soil 3 | 26650 |
| Ø32 | 54.0 soil 0.5 | 0.08 soil 0.02 | 47 soil 4 | 8 soil 3 | 32650 |
| Ø46 | 75.0 soil 0.5 | 0.08 soil 0.02 | 47 soil 4 | 8 soil 3 | 46800 |
Note: Special standards depend on the actual situation.
Special advice: Please store the product in an environment below 30 ℃, avoid direct sunlight or close to a heat source.
contact us
Related Popular Products
BJ-BZ Platinum Braided Mesh Tube
Platinum Braided Mesh Tube is carefully woven with metallic colored polyester thread. The product has good characteristics of heat reflection and strong metallic feeling. At the same time, the product has the characteristics of light weight, smooth surface and excellent gloss.
KY-SR Medical silicone tube
KEYUCE silicone tube can be used in food and medical fields, particularly food grade silicone tube, medical silicone tubes, peristaltic silicone tubes, ultra-thin silicone tubes, molded silicone products, etc. Equipment, medical consumables, GMP pharmaceuticals, hemodialysis, heart and brain treatment, blood, food and other fields provide customers with high-quality precision silicone products. 1.Product Features All specifications can be customized according to customer requirements. 2.Divided by use: Medical silicone tube Single chamber, double chamber, triple chamber, multi chamber, double row, triple row silicone tube or other special shaped silicone tube. Color: clear natural color/customized Shore hardness: 30A - 80A Heat resistance: -50°C – 200°C 3.Medical ultra-thin silicone tube Material: Imported raw materials of pure medical grade silicone rubber, extrusion molding with platinum vulcanization Size: 0.3*0.6mm, 0.5*1.0mm, customized Color: Clear/Customized Shore hardness: 30A-80A 4.Special silicone material for peristaltic pump National standard size: 13#14#15#16#17#18#19#24#25#35#36#73#82#88#92#etc. Custom size: 1*3 1.5*3.5 1.6*3.2 2*4 2.2*4.4 2.44 2.64.73546/customer Product Color: Transparent Natural Color/Beige/Customized Shore hardness: 30A-80A Temperature range: -50°C-200°C Pressure range: 0.1-0.3MPa 5.Product Features: (1). Using imported silicone rubber extrusion molding process, the inner wall of the cavity is smooth and will not stick after long-term extrusion. (2). The dimensional tolerance is accurate and the wall thickness is uniform and not eccentric. (3). Fatigue resistance, wear resistance, high tensile strength, high elasticity, less slag after long-term wear and stable fluidity. 6.Product service life: (1) The main factors affecting the service life of silicone tubes are: (2) Performance characteristics of the silicone tube material; (3) Pump speed; (4) Pressure when pumping liquid; (5) Chemical compatibility; (6) Corrosiveness of the liquid. 7.KEYUCE's test method for the service life limit of silicone peristaltic pump tube is as follows: (1). The pumped medium is clean water at normal temperature and pressure; (2). The peristaltic pump speed is 300 rpm; (3). Continuous testing for 24 hours without interruption: (4). The test showed that the maximum continuous operation time of the silicone peristaltic pump tube is more than 500 hours 8.Chemical suitability of the product (1). Resistant to weak acids and weak bases: weak corrosives, low concentration potassium permanganate, ethanol reagents, animal oils, vegetable oils, vanilla, glucose, alcohol, hand sanitizers, fruit juices, disinfectants, blood, weakly acidic and alkaline gases, etc. (2). Not suitable for strong acids and strong alkalis and organic solvents such as: high concentration sulfuric acid, hydrochloric acid, sodium hydroxide, nitric acid, lubricating oil, silicone oil, mineral oil, machine oil, gasoline, diesel oil, hydraulic oil, high concentration acetone, carbon tetrachloride, high ozone concentration. (3). If you have other questions about the applicability of the product, please contact us. Scope of application Widely used in: (1). Laboratory equipment, peristaltic pump, dosing pump or other filling equipment. (2). GMP pharmaceuticals, bioengineering, molecular biology, fine chemistry, environmental protection, food industry, drinking water production and other areas Value Added Services (1). Can be customized according to requirements, logo can be printed, and cutting services can also be provided (2) 15m bags/bag or according to the length required by customer (3)Pass five FDA/LFGB/RoHS/REACH/Biocompatibility tests
KY-MT-PVDF environmentally friendly flexible fluorine medical heat shrink tubing
Product Name： Eco-Friendly Flexible Fluorine Medical Heat Shrink Tubing Model：KY-MT-PVDF
Curved Molded Bushing
You can choose suitable materials according to different usage environment requirements to meet military and commercial multi-level requirements, easy to install and use, and waterproof with adhesive.
CFT carbon fiber
Carbon fiber bushing is made of refined carbon fiber yarn, carbon fiber is a new material with excellent mechanical properties, the specific gravity is less than 1/4 of steel, the tensile strength of carbon fiber resin composite material is generally above 3500Mpa, which is 7~9 times that of steel, with super flexibility, high temperature, light specific gravity and others characteristics. The bushing can be used to bush some irregular surface wires, cables or hoses, and the product has excellent stability and high torsional strength.
JLBZ - Nylon Braided Sleeves
(The material is also a type of nylon, but the appearance is like cotton thread, one by one structure, not one by one wire diameter, such as 0.2-0.25mm unit, can only be considered one by one thread). Nylon Braided Tube is made from Army Green Nylon Fiber. The products have the special advantages of softness, light weight and good environmental resistance, in addition, in the multi-branch cable assembly, the processing of the ends of the nylon silk sleeve is relatively easy, the seam and tie method can be used to ensure the bifurcation is soft and easy, has a good protective effect on the wire harness inside the cavity with a narrow space.
KY-135℃-2X Heat Resistant 135℃ Polyolefin Heat Shrink Sleeve
Product Introduction Made from high quality soft polyethylene material...
Road accident carpet protective sleeve
It is made of polyester multifilament and nylon hook, which can be used to secure and protect wires and cables placed on the carpet. The free disassembling characteristics of the hook surface makes it convenient to remove and maintain wires and cables, and has good fire resistance, wear resistance and heat insulation.
KY-RT fireproof winding pipe
Product Description: Material: polyethylene (PE) + flame retardant; Colors - milky white and...
HSCT-Waterproof Insulated Heat Shrink Terminal
HSCT - Insulated Waterproof Heat Shrink Terminal
OAF aluminum foil fiberglass pipe
The aluminum foil (OAF) glass fiber tube is divided into inner and outer layers, the inner layer is woven with glass fiber yarn, and the outer layer is covered with a layer of aluminum foil. With special technology, this product has good performance of shading, heat reflection, thermal insulation and signal shielding, high and low temperature resistance and flexibility.
heat shrink molding/shrink boot
KEYUACE's portfolio of heat shrink sealing components for wire harnesses is designed for...
Polyperfluoropropylene medical heat shrink tubing KY-MT-FEP
Product Name: Polyperfluoropropylene Medical Heat Shrink Tubing Model: KY-MT-FEP
KI-NILON (PA66) Telescopic braided mesh sleeve
KY-NILON telescopic braided mesh (PA66) is made of nylon monofilament 66, which has excellent wear resistance, corrosion resistance and softness. Nylon braided grommets are widely used in military, automobile, aviation and other fields to protect wire harnesses, hoses, pipes and other components.
OFPT single-core fiber optic protective
Consists of clear heat shrink tube, clear hot melt tube and reinforced stainless steel rod. Suitable for connectors, adapters, fiber optic patch cords, etc.
HESA - Special Rubber Heat Shrink Sleeve for Wire Harness for New Energy Vapors
Co-extruded from flexible polyolefin and hot-melt wire harness adhesive and used to protect the insulation of wires, cables, wiring harnesses and connectors that need to be sealed, waterproof and moisture-proof.