Products
-
YST-H - High Speed Heat Shrink Tubing for Compressors (Also known as High Shrink Polyester Heat Shrink Hose)
-
Heat shrink solder terminal HSCT-P with shielded wire
-
KEYUACE is carbon corrugated pipe (commonly known as carbon thread pipe, single wall spiral pipe, carbon corrugated pipe, black spiral pipe)
-
BSC-G halogen-free environmentally friendly marking sleeve
-
KY-SR Medical silicone tube
-
NLFZ non-shrink nylon textile sleeves
-
Colored tube with EC number
-
Eco-friendly Semi-Rigid Fluorine Medical Heat Shrink Tubing
-
HSCT-KL special tensile heat shrink insulation
-
WAG-PP corrugated pipe
-
KY-DR Oil Resistant and Corrosion Resistant Heat Shrink Sleeve
-
Silicone Huggers for Candles
-
HW anti-slip pattern heat shrink sleeves
-
PMI foam board
-
ZCP - all-plastic rubber protective sleeve with braiding for separate wires
-
H1：KY-TPU polyester film tube
HESA - Special Rubber Heat Shrink Sleeve for Wire Harness for New Energy Vapors
Co-extruded from flexible polyolefin and hot-melt wire harness adhesive and used to protect the insulation of wires, cables, wiring harnesses and connectors that need to be sealed, waterproof and moisture-proof.
Description
marker
Product Introduction
Co-extruded from flexible polyolefin and hot-melt wire harness adhesive and used to protect the insulation of wires, cables, wiring harnesses and connectors that need to be sealed, waterproof and moisture-proof.
HESA-Xinneng special waterproof heat shrink tube for automotive wiring harness can be well applied in many industries, such as electronics and electrical appliances, automobile, communication, etc.
Heat shrink tubing with HESA adhesive is also widely used in automotive wiring harnesses, household wiring harnesses, wire and cable branches, metal pipes and other places where insulation protection is needed.
Product Features
1.Shrinkage ratio 4:1
2.Superior hot melt adhesive and high shrinkage rate ensure superior sealing
3.Sealing and insulation protection for electronic connection applications.
4.Easy to repair damaged insulation without removing the connector.
Operating indicators
Continuous use temperature range: -55℃~125℃
Initial shrinkage temperature: 80℃
Minimum full shrink temperature: 110℃
Compliant with Standard: Compliant with ROHS 2.0, 125℃, 600V.
Product Specification
| Specification | Size before shrinkage (mm) | Size after shrinkage (mm) | ||
| Inner diameter (mm) | Wall thickness (mm) | Inner diameter (mm) | Wall thickness (mm) | |
| Φ4.0 | 4.50±0.30 | 0.50±0.20 | 1.1 | 1.30±0.10 |
| Φ6.0 | 6.50±0.30 | 0.55±0.20 | 1.5 | 1.50±0.10 |
| Φ8.0 | 8.30±0.30 | 0.60±0.20 | 2.0 | 1.70±0.10 |
| Φ10.0 | 10.5±0.50 | 0.70±0.20 | 2.5 | 1.90±0.10 |
| Φ14.0 | 14.5±0.50 | 0.78±0.20 | 3.5 | 2.30±0.10 |
| Φ18.0 | 18.7±0.50 | 0.85±0.20 | 4.5 | 2.50±0.10 |
| Φ20.0 | 20.5±0.50 | 0.85±0.20 | 4.5 | 2.60±0.10 |
| Φ22.0 | 22.0±0.50 | 0.85±0.20 | 4.5 | 2.70±0.10 |
| Φ25.0 | 26.0±1.0 | 0.85±0.20 | 6.0 | 2.70±0.10 |
| Φ33.0 | 34.0±1.0 | 0.85±0.20 | 8.0 | 2.90±0.10 |
| Φ40.0 | 42.0±2.0 | 0.85±0.20 | 12.0 | 3.00±0.10 |
Standard color: black, transparent, other colors can be customized.
Specified size, cutting can be provided separately according to customer's requirements.
Performance Metrics
| Project | Requirements for indicators | Test method | Typical values |
| longitudinal shrinkage (200±5℃, 3min) |
±10% | ASTMD2671 | ±7% |
| eccentricity | ≤35% | ASTMD2671 | 15% |
| tensile strength | ≥9.0 MPa | ASTM D 638 | 10 MPa |
| elongation at break | ≥250% | ASTM D 638 | 500% |
| Elongation at break after aging (thermal aging 158°C, 168 hours) |
≥100% | ASTM D 638 | 300% |
| heat shock heat shock (4 hours, 200±5℃) |
The outer layer has no cracks, no flow,
no drips |
ASTM D 2671 | through |
| Softness at low (-55°C, 4 hours) |
No cracks | ASTM D 2671 | through |
| Voltage resistance and insulation breakdown | 2500V, 60sec, without breakdown | ASTM D 2671 | through |
| volumetric resistivity | ≥l0l2Ω.cm. | ASTM D 876 | 10I4Ω cm |
| copper corrosion (16 hours, 121±2°С) |
No corrosion | ASTM D 2671 | through |
| Copper stability
(158°С, 168 h) |
Elongation ≥100% | ASTM D 2671 | through |
contact us
Related Popular Products
MWAG - Metal Corrugated Hose with Plastic Coated Stainless Steel
The inner layer of MWAG plastic metal corrugated hoses is stainless steel in steel coating with 201, 304, 316 stainless steel strip and special anti-corrosion treatment, the outer layer is PVC material (UV and aging resistant).
KY-MT-90R-NV-X Halogen-free, environmentally friendly, non-flammable medical heat shrink tubing
Product Name: Halogen-free, environmentally friendly, non-flammable medical heat shrink tubing. Model: KY-MT-90R-NV-X Compatible with human contact, insulating properties, high wear resistance, strong environmental protection, high shrinkage.
KY-VITON heat shrink sleeves phyton heat shrink resistance 200℃
Product Introduction It is made of high quality VITON fluorine rubber, cross-linked fluorocarbon...
Telescopic braided sleeve KY-PPS
KY-PPS telescopic braided hose is made of monofilament filament made from UL94 VO grade PSS raw material, which has corrosion resistance, high temperature, high wear resistance, low hygroscopicity and dimensional stability.
More information about this topic More information
There is a lot of information about this type of product. More information and more information about this, More, more information, more This is the most important thing in the world.
Eco-friendly Semi-Rigid Fluorine Medical Heat Shrink Tubing
Product Name: Polyperfluoropropylene Medical Heat Shrink Tubing Model: KY-MT-sPVDF
Military Grade Heat Shrink Marking Tube BSC-H
Military Grade Heat Shrink Marking Tube BSC-H
HNM High Wear Resistant Braided Mesh Pipe
HNM High Wear Resistant Braided Mesh Pipe is made of special high wear resistant monofilament weave. In addition to the elasticity, fire resistance and heat insulation of ordinary PET woven sleeve, its wear resistance is three times higher than that of ordinary PET woven mesh pipe.
Eco-friendly HUS Heat Shrink Tubing Containing Glue
Product Description The outer layer consists of a double layer of fire-resistant insulating...
KY-FEP 200℃ FEP Тефлоновая термоусадочная contact
Read more FEP The most important thing is the FEP file. More...
MZF-black scooter textile protective sleeve
MZF-Black self-rolling textile protective sleeve is made of polyester monofilament and multifilament textiles. It has the characteristics of fire-retardant, wear-resistant, soft, dust-proof, simple and fast operation, etc. The open design is conducive to protecting the modification, reinstallation, maintenance and repair of the internal wiring harness.
SR-N silicone tubes
Product Introduction The silicone tube is extruded from environmentally friendly non-toxic...
MC-Flat Cover Corrugated Metal Hose
Flat coated stainless steel plastic hose is used as wire and cable protection pipe for automatic instrument wire, cables and signals, has good flexibility, corrosion resistance, high temperature resistance, wear resistance and tensile strength.
JLBZ - Nylon Braided Sleeves
(The material is also a type of nylon, but the appearance is like cotton thread, one by one structure, not one by one wire diameter, such as 0.2-0.25mm unit, can only be considered one by one thread). Nylon Braided Tube is made from Army Green Nylon Fiber. The products have the special advantages of softness, light weight and good environmental resistance, in addition, in the multi-branch cable assembly, the processing of the ends of the nylon silk sleeve is relatively easy, the seam and tie method can be used to ensure the bifurcation is soft and easy, has a good protective effect on the wire harness inside the cavity with a narrow space.
