Products
-
KY-UPVC Heavy Duty Solar Corrugated Tube
-
Waterproof TPU Tubular Film
-
LN-BZW zipper braided mesh tube
-
Heat-shrinkable busbar sleeve MP-1KV
-
PVC Right Spiral Reinforcement Hose and Air Hose for Fire Fighting Equipment
-
Y-Shape Special Shaped Shrink Wrap
-
NLFZ non-shrink nylon textile sleeves
-
PET capacitor sleeve
-
Special Sealed Heat Shrink Sleeve for TXC Fiber Optic Cable Junction Box
-
HSU-PA special semi-rigid sealed waterproof heat shrink tube with adhesive
-
D-436, TE Tyco equivalent
-
OFPT single-core fiber optic protective
-
HUS-DW Double Wall Anti-Extrusion Heat Shrink Tubing
-
BSC-G halogen-free environmentally friendly marking sleeve
-
MP-35KV Busbar Heat Shrink Sleeve
-
MC-flat plastic metal corrugated hose
Heat Shrink Molding Sleeve with Multiple Forks
KEYUACE Heat Shrink Cable Plugs provide stress protection for cable assemblies used in harsh environments.
These products help prevent the osmotic effects of salt water, fuels and petroleum-based solvents.
Description
marker
Product Description
● KEYUACE Heat Shrink Cable Plugs provide stress protection for cable assemblies used in harsh environments.
● These products help prevent the osmotic effects of salt water, fuels and petroleum-based solvents.
● Heat shrink fork sleeves and reducers are available in the popular "T" or "Y" or multi-hole shape for multi-drop cables and with a variety of exit angles and taps that provide strain relief, sealing and mechanical protection for multi-drop cable assemblies.
●You can choose suitable materials according to different requirements of the use environment to meet military and commercial multi-level requirements, easy to install and use, and waterproof with adhesive.
●You can choose suitable materials according to different requirements of the use environment to meet military and commercial multi-level requirements, easy to install and use, and waterproof with adhesive.
● Complies with RoHS, REACH environmental protection standards.
Characteristics of the shrink sleeve material
| material code | Material category | Hardness (Shore A) | operating temperature | Installation temperature | Material characteristics |
| -4 | Anti-mildew soft flame retardant polyolefin | 82±2 | ﹣55～135℃ | 150℃ | Mildew resistant, especially soft, fire resistant, wear resistant, liquid |
| -12 | Modified fluorine | 87±2 | ﹣55～200℃ | 220℃ | Soft, flame retardant, heat resistant, excellent oil and solution resistance |
| -25 | solution resistant rubber | 92±2 | ﹣55～150℃ | 175℃ | Semi-solid, flame retardant, chemical, wear resistant, liquid resistant, heat resistant |
| -71 | Semi-rigid modified polyolefin | 90±2 | ﹣55～135℃ | 150℃ | Semi-solid, fire-resistant, liquid-resistant, heat-resistant, wear-resistant |
| -100 | Halogen-free flame retardant polyolefin | 90±2 | ﹣30～120℃ | 150℃ | Halogen-free, flame retardant, low smoke, environmentally friendly |
Indicators of the material characteristics of the shrink sleeve
| Productivity | Test | unit | material code | Test method | |||||
| -4 | -12 | -25 | -71 | -100 | |||||
| physical properties | Size Appearance after shrinkage | / | No cracks and compliance with the type and size requirements after the product shrinks | JB/T7829-2006 | |||||
| Hardness (Shore) | degree | 82±2 | 87±2 | 92±2 | 90±2 | 90±2 | GB/T2411-2008 | ||
| tensile strength | MPa | ≥16 | ≥12 | ≥14 | ≥14 | ≥10 | GB/T1040.2-2006 | ||
| elongation at break | ﹪ | ≥450 | ≥350 | ≥350 | ≥300 | ≥250 | GB/T1040.2-2006 | ||
| water absorption
(23℃ 24h) |
％ | ≤0.15 | ≤0.15 | ≤0.15 | ≤0.15 | ≤0.15 | GB/T2951.13-2008 | ||
| density | g/s㎥³ | 1.1±0.1 | 1.0±0.1 | 1.1±0.1 | 1.2±0.1 | 1.3±0.1 | GB/T1033-2008 | ||
| low temperature embrittlement | -55±5℃ 4 hours | ℃ | no cracks, no cracks | / | GB/T5470-2008 | ||||
| aging properties | Thermal aging in oven 135℃ 168h | elongation at break | ﹪ | ≥350 | / | / | ≥200 | ≥100 | GB/T7141-2008 |
| tensile strength | MPa | ≥12 | / | / | ≥10 | ≥8 | GB/T7141-2008 | ||
| Thermal aging in oven 150℃ 168h | elongation at break | ﹪ | / | / | ≥250 | / | / | GB/T7141-2008 | |
| tensile strength | MPa | / | / | ≥10 | / | / | GB/T7141-2008 | ||
| Thermal aging in 200℃ oven 168 hours | elongation at break | ﹪ | / | ≥250 | / | / | / | GB/T7141-2008 | |
| tensile strength | MPa | / | ≥10 | / | / | / | GB/T7141-2008 | ||
| Thermal shock 200℃ 4h | / | Doesn't crack, doesn't leak, doesn't drip | JB/T7829-2006 | ||||||
| Thermal shock 300℃ 4h | / | / | No cracks | / | / | / | JB/T7829-2006 | ||
| electrical properties | insulation strength | Kv/mm | ≥14 | ≥10 | ≥10 | ≥12 | ≥10 | GB/T1408.1-2016 | |
| volumetric resistivity | Ω.cm | ≥1×1011 | ≥1×1010 | ≥1×1010 | ≥1×1010 | ≥1×1010 | GB/T1410-2006 | ||
| Chemical properties | fire resistance | / | B-1 | GB/2408-2008 | |||||
| copper corrosion | / | 150±5℃ 168h passes | UL224 | ||||||
| smoke density | / | / | / | / | / | ≤32 | GB/T8323.2-2008 | ||
| Mold resistance | / | ≤2 | ≤2 | ≤2 | ≤2 | / | GJB150.10A-2009 | ||
| moisture-thermal properties | Humidity 95% 60℃~30℃ converted 5 times, 24 hours. Periodic Test Qualified | GJB150.9A-2009 | |||||||
| Effectiveness of salt spray | 5% saline solution at 35°C for 48 hours continuous spraying,
Good appearance, no corrosion |
GJB150.11A-2009 | |||||||
| Environmental resistance | aviation oil F40 (23℃ 24h) | tensile strength | MPa | 10.5 | 9 | 11 | 8 | 6 | GB/T2951.21-2008 |
| elongation at break | ％ | 350 | 230 | 300 | 200 | 180 | GB/T2951.21-2008 | ||
| Lubricating oil 23℃ 24h | tensile strength | MPa | ≥12 | ≥10 | ≥12.5 | ≥9 | ≥7 | GB/T2951.21-2008 | |
| elongation at break | ％ | 380 | 260 | 330 | 220 | 200 | GB/T2951.21-2008 | ||
Product selection
Application:
This shrink sleeve provides mechanical protection and stress relief at the bifurcation of fine wires and thin cables.
Size selection table KY/MS-5B/W-01~06
| serial number | Product model | Размер до усадки | size after shrinkage | |||||
| H min | J,K,L&N
min |
Hmax | J,K,L&N
m and n |
HW±20% | V±10% | P±10% | ||
| 1 | KY/MS-5B/W-01 | 13.2 | 6.6 | 6.9 | 3.4 | 1.52 | 1.02 | 24.1 |
| 2 | KY/MS-5B/W-02 | 19.3 | 9.4 | 9.7 | 5.3 | 1.78 | 1.02 | 35.6 |
| 3 | KY/MS-5B/W-03 | 19.3 | 13.2 | 9.7 | 6.9 | 1.78 | 1.52 | 49.3 |
| 4 | KY/MS-5B/W-04 | 26.9 | 13.2 | 13.0 | 6.9 | 2.54 | 1.52 | 49.3 |
| 5 | KY/MS-5B/W-05 | 38.6 | 19.3 | 18.5 | 9.7 | 3.05 | 1.78 | 71.9 |
| 6 | KY/MS-5B/W-06 | 55.6 | 26.9 | 26.7 | 13.0 | 4.57 | 2.54 | 101.6 |
contact us
Related Popular Products
HSCT-R-S Series Heat Shrink Terminals with Solder Insulation 150 Degree
HSCT-R-S Series Heat Shrink Terminals with Solder Insulation 150 Degree TE models of the same class: D-1744-01~04.
KY-PET PET Heat Shrink Sleeve
Made of polyethylene terephthalate (PET), it is easy to use, colorful and has good insulation. It is mainly used in insulation and packaging materials for light industry, electronics and other industries, such as aluminum electrolytic capacitors, batteries, inductors, lighting tubes and other electronic components.
PVC coated yarn
Product name: PVC coated yarn Material: PVC + PA Operating temperature: -40℃~+120℃ Other...
Special Sealed Heat Shrink Sleeve for TXC Fiber Optic Cable Junction Box
The heat shrink tube is divided into middle wall and thick wall. The outer layer of semi-rigid PE polyolefin insulation, the inner layer of hot-melt adhesive (EVA or PA) provides good mechanical protection for the connection between the box and the cable. The inner layer of hot melt adhesive (2 types of spiral/straight coating) provides bonding and waterproof sealing. The advantage of spiral surfacing is that it does not slip during construction, has better air retention and is more suitable for irregular and large joints.
MP-10KV Busbar Heat Shrink Sleeve
MP-10KV busbar heat shrink sleeve is widely known as copper row protection tube, made of environmentally friendly PE polyolefin heat shrink material cross-linked by high energy electron beam bombardment. The products have good bending resistance, scratch resistance, and high insulation strength and electrical carbon footprint, suitable for corrosion protection and insulation of switchgear, substation busbar, busbar and electrical equipment.
Heat shrink solder terminal HSCT-P with shielded wire
Heat shrink solder terminal HSCT-P with shielded wire
NLPA Multifilament Nylon Braided Mesh Tube
Multi-wire nylon woven mesh tube (NLPA) is tightly woven with multiple nylon threads, has high wear resistance, excellent corrosion resistance, good softness, and reduces machine noise.
KFL Keflar casing
Finely crafted from Kevla fiber (aramid 1414), it has the characteristics of wear resistance, moisture resistance, high elongation, light weight and dimensional stability. It can be used to protect wires and hoses in harsh environments.
KY-DR Oil Resistant and Corrosion Resistant Heat Shrink Sleeve
Product Introduction DR-150℃ Oil Resistant and Corrosion Resistant Heat Shrinkable Pipe...
KY-TSB -Splashproof Fire Retardant Double Layer Polyurethane Hose
Product Introduction The outer layer is a high quality fire retardant layer...
Military Grade Heat Shrink Marking Tube BSC-H
Military Grade Heat Shrink Marking Tube BSC-H
Y-Shape Special Shaped Shrink Wrap
Special heat shrink shaped sleeve to protect specially shaped wire and cable branches can be selected from suitable materials according to different requirements of the use environment, meet military and commercial multi-level requirements, easy to install and use, and waterproof with adhesive.
NL-CB thick flat braided mesh pipe
Thick flat nylon braided sleeve is woven with special nylon flat wire, which has the flexibility and thermal insulation of ordinary PET mesh pipes, as well as the special structure of nylon flat wire. The wear resistance of this mesh pipe is more than ten times higher than that of ordinary mesh pipes.
PU polyurethane PU pipe
Product Introduction The hose, made of polyurethane PU material, has...
Elastic CAP-TX cover and dust protection
Scope of application For Accessories Product Specification signs Main ingredient: PVC Product preservation environment Store in a cool, dry and ventilated place.